Skip to content

Plains Fire and EMS Frequencies

Plains in Sanders County, Montana has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Plains (Montana Public Safety Communications System), about 6 miles away.

About Plains Fire and EMS Frequencies

Quick answer: Fire dispatch for Plains: Plains Fire 155.1450 MHz, narrow FM, no tone.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Plains conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Plains
AgencyDescriptionFrequency (MHz)ToneModeFCC
Plains FireDPW/Fire/Police – Common155.1450FMNWNLZ768

Sanders County channels that also cover Plains

Fire Dispatch

Fire Dispatch frequencies for Sanders County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Heron Rural Fire DistrictHeron Rural Fire District – Dispatch154.2500FMNWNKU406
Noxon Rural Fire DistrictNoxon Rural Fire District – Dispatch154.1750FMNWNKH607
Plains-Paradise Rural Fire DistrictPlains-Paradise Rural Fire District – Dispatch155.8950FMNWQCG504
Sanders County FireFire / EMS Dispatch154.1450FMNWNAU898
Thompson Rural Fire DistrictThompson Rural Fire District – Dispatch154.1300FMNWNKR838

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sanders County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Trout Creek Rural Fire DistrictOperations154.1300FMNWNAU898
Trout Creek Rural Fire DistrictOperations154.1450FMNWNAU898
Trout Creek Rural Fire DistrictOperations154.1750FMNWNAU898

Nearest trunked radio sites

Distances are measured from the center of Plains.

Plains · Montana Public Safety Communications System
RFSS 1 · Site 99 (hex 63) · NAC 160 · about 6 mi away
Control 151.43, 154.95
Voice 155.94, 156.195
West Polson · Montana Public Safety Communications System
RFSS 1 · Site 16 (hex 10) · about 36 mi away
Control 151.28, 161.925
Voice 151.325, 151.385
Big Arm / Jette · Montana Public Safety Communications System
RFSS 1 · Site 22 (hex 16) · about 36 mi away
Control 161.825, 161.8875
Voice 161.9375, 161.95
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Plains?

Fire dispatch channels listed for Plains: Plains Fire 155.1450 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Plains?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Plains?

For Plains, start with the Plains site of Montana Public Safety Communications System. Its control channels are 151.43, 154.95 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Plains fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Plains are marked encrypted.