About Big Timber Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Big Timber: Sweet Grass County Fire 151.1150 MHz, narrow FM, 100.0 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Sweet Grass County channels that also cover Big Timber
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sweet Grass County Fire | East | 151.1150 In 159.2700 | 100.0 PL | FMN | WQJF245 |
| Sweet Grass County Fire | East P25 | 151.1150 In 159.2700 | P25 | WQJF245 | |
| Sweet Grass County Fire | West | 154.2200 In 159.1350 | 100.0 PL | FMN | WQJF245 |
| Sweet Grass County Fire | West P25 | 154.2200 In 159.1350 | P25 | WQJF245 |
Nearest trunked radio sites
Distances are measured from the center of Big Timber.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Big Timber?
We do not have a fire dispatch channel listed specifically for Big Timber. The county-level fire dispatch channels in the same county: Sweet Grass County Fire 151.1150 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Big Timber?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Big Timber?
For Big Timber, start with the Greycliff site of Montana Public Safety Communications System. Its control channels are 151.34, 173.825 MHz. Program a control channel first; the scanner finds the voice channels from it.