Skip to content

Blaine Fire and EMS Frequencies

We do not have frequencies listed specifically for Blaine in Adams County, Nebraska yet. Countywide channels for Adams County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hastings (Adams County), about 3 miles away.

About Blaine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Blaine: Adams County Fire 152.0075 MHz, narrow FM, no tone. Trunked: Adams County, for example Adams County Fire talkgroup 50 (hex 32).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Adams County: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Blaine, start with the Hastings site of Adams County, about 3 miles away. Its control channels: 460.3875 MHz.

Data updated .

Adams County channels that also cover Blaine

Fire Dispatch

Fire Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireCounty Paging152.0075FMNKZO216
Adams County FireCounty Fire Dispatch453.0500
In 458.0500
114 DPLFMNWPYI956
Adams County FireCounty Fire453.3500
In 458.3500
125 DPLFMNWPYB836

Adams County

Adams County talkgroups
AgencyDescriptionTalkgroupHexMode
Adams County FireAdams County Fire – Dispatch5032T
Adams County FireAdams County Fire – Tactical Channel5133T
Adams County FireAdams County Fire – Tactical Channel5234T

Nearest trunked radio sites

Distances are measured from the center of Blaine.

Hastings · Adams County
Site 1 (hex 1) · about 3 mi away
Control 460.3875
Voice 460.0875, 460.6125
Ayr · Nebraska State Radio System
RFSS 1 · Site 89 (hex 59) · NAC B8F · about 10 mi away
Control 152.51, 152.69
Voice 152.03, 152.18
Ayr · Adams County
Site 4 (hex 4) · about 10 mi away
Control 453.4875
Voice 453.2, 453.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Blaine?

We do not have a fire dispatch channel listed specifically for Blaine. The county-level fire dispatch channels in the same county: Adams County Fire 152.0075 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Blaine?

Yes. The county-level systems that cover Blaine are Fire and EMS talkgroups are listed for Adams County: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Blaine?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Blaine?

For Blaine, start with the Hastings site of Adams County. Its control channels are 460.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.