About Cottonwood Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Cottonwood: Adams County Fire 152.0075 MHz, narrow FM, no tone. Trunked: Adams County, for example Adams County Fire talkgroup 50 (hex 32).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Adams County: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cottonwood, start with the Holstein site of Adams County, about 1 miles away. Its control channels: 453.5125 MHz.
Data updated .
Adams County channels that also cover Cottonwood
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Adams County Fire | County Paging | 152.0075 | FMN | KZO216 | |
| Adams County Fire | County Fire Dispatch | 453.0500 In 458.0500 | 114 DPL | FMN | WPYI956 |
| Adams County Fire | County Fire | 453.3500 In 458.3500 | 125 DPL | FMN | WPYB836 |
Adams County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Adams County Fire | Adams County Fire – Dispatch | 50 | 32 | T |
| Adams County Fire | Adams County Fire – Tactical Channel | 51 | 33 | T |
| Adams County Fire | Adams County Fire – Tactical Channel | 52 | 34 | T |
Nearest trunked radio sites
Distances are measured from the center of Cottonwood.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cottonwood?
We do not have a fire dispatch channel listed specifically for Cottonwood. The county-level fire dispatch channels in the same county: Adams County Fire 152.0075 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Cottonwood?
Yes. The county-level systems that cover Cottonwood are Fire and EMS talkgroups are listed for Adams County: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Cottonwood?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cottonwood?
For Cottonwood, start with the Holstein site of Adams County. Its control channels are 453.5125 MHz. Program a control channel first; the scanner finds the voice channels from it.