Skip to content

Plum Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Plum Creek in Butler County, Nebraska yet. Countywide channels for Butler County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Milford (Nebraska State Radio System), about 24 miles away.

About Plum Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Plum Creek: Butler County Fire 453.4000 MHz, narrow FM, 131.8 PL. Trunked: Nebraska State Radio System, for example Butler County Fire talkgroup 52504 (hex cd18).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Plum Creek, start with the Milford site of Nebraska State Radio System, about 24 miles away. Its control channels: 155.565, 156.21 MHz.

Data updated .

Butler County channels that also cover Plum Creek

Fire Dispatch

Fire Dispatch frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireFire Paging453.4000
In 458.4000
131.8 PLFMNWPHW600
Butler County FireButler County Fire – Dispatch453.5375115 DPLFMN—
Butler County FireButler County Fire – Dispatch453.8125
In 458.8125
343 DPLFMNWPHW600

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireButler County Fire – Fire Ground453.1625
In 458.1625
115 DPLFMNWPHW600

Nebraska State Radio System

Nebraska State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Butler County FireButler County Fire – Dispatch52504cd18D

Nearest trunked radio sites

Distances are measured from the center of Plum Creek.

Milford · Nebraska State Radio System
RFSS 1 · Site 69 (hex 45) · NAC B83 · about 24 mi away
Control 155.565, 156.21
Voice 154.8975, 155.07
Osceola · Nebraska State Radio System
RFSS 1 · Site 73 (hex 49) · NAC B8C · about 26 mi away
Control 155.625, 155.97
Voice 154.6575, 155.355
Community Correctional Center · Nebraska State Radio System
RFSS 1 · Site 101 (hex 65) · NAC B81 · about 27 mi away
Control 770.11875, 770.36875, 770.84375, 771.11875
Voice 769.81875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Plum Creek?

We do not have a fire dispatch channel listed specifically for Plum Creek. The county-level fire dispatch channels in the same county: Butler County Fire 453.4000 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Plum Creek?

Yes. The county-level systems that cover Plum Creek are Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Plum Creek?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Plum Creek?

For Plum Creek, start with the Milford site of Nebraska State Radio System. Its control channels are 155.565, 156.21 MHz. Program a control channel first; the scanner finds the voice channels from it.