About Cedar Fire and EMS Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Nance County channels that also cover Cedar
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nance, County of | Fullerton Fire | 155.2950 | 162.2 PL | FMN | WPUY434 |
Nearest trunked radio sites
Distances are measured from the center of Cedar.
Albion · Nebraska State Radio System
RFSS 1 · Site 92 (hex 5C) · NAC 14B · about 15 mi away
Control 155.5725, 155.88
Voice 154.6875, 155.025
Osceola · Nebraska State Radio System
RFSS 1 · Site 73 (hex 49) · NAC B8C · about 29 mi away
Control 155.625, 155.97
Voice 154.6575, 155.355
Wolbach · Nebraska State Radio System
RFSS 1 · Site 58 (hex 3A) · NAC B8D · about 29 mi away
Control 155.46, 155.64
Voice 154.845, 155.19
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What scanner do I need to listen to fire and EMS in Cedar?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Cedar?
For Cedar, start with the Albion site of Nebraska State Radio System. Its control channels are 155.5725, 155.88 MHz. Program a control channel first; the scanner finds the voice channels from it.