About Linoma Beach Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Linoma Beach: Sarpy County Fire 453.9000 MHz, narrow FM, CSQ. Trunked: Omaha Regional Interoperability Network (ORION), for example Sarpy County Fire talkgroup 4010 (hex faa).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Omaha Regional Interoperability Network (ORION): 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Linoma Beach, start with the Gretna site of Omaha Regional Interoperability Network (ORION), about 3 miles away. Its control channels: 859.3125, 859.4875, 860.4375 MHz.
- 4 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Sarpy County channels that also cover Linoma Beach
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sarpy County Fire | Dispatch Paging | 453.9000 In 458.9000 | CSQ | FMN | WPIK695 |
Omaha Regional Interoperability Network (ORION)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sarpy County Fire | Sarpy County Fire – Tactical Channel | 4010 | faa | D |
| Sarpy County Fire | Sarpy County Fire – Tactical Channel | 4061 | fdd | D |
| Sarpy County Fire | Sarpy County Fire – Tactical Channel | 4077 | fed | D |
| Sarpy County Fire | Sarpy County Fire – Tactical Channel | 4088 | ff8 | D |
| Sarpy County Fire | Sarpy County Fire – Tactical Channel | 4092 | ffc | D |
| Sarpy County Fire | Sarpy County Fire – Tactical Channel | 4093 | ffd | D |
| Sarpy County Fire | Sarpy County Fire – Tactical Channel | 4090 | ffa | D |
| Sarpy County Fire | Fire Training | 4177 | 1051 | D |
| Sarpy County Fire | Fire Training | 4178 | 1052 | D |
4 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sarpy County Fire | East | 4049 | fd1 | D Encrypted |
| Sarpy County Fire | West | 4050 | fd2 | D Encrypted |
| Sarpy County Fire | East Station Alerting | 4301 | 10cd | D Encrypted |
| Sarpy County Fire | Fire Operations 1 Secure | 4250 | 109a | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Linoma Beach.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Linoma Beach?
We do not have a fire dispatch channel listed specifically for Linoma Beach. The county-level fire dispatch channels in the same county: Sarpy County Fire 453.9000 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Linoma Beach?
Yes. The county-level systems that cover Linoma Beach are Fire and EMS talkgroups are listed for Omaha Regional Interoperability Network (ORION): 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Linoma Beach?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Linoma Beach?
For Linoma Beach, start with the Gretna site of Omaha Regional Interoperability Network (ORION). Its control channels are 859.3125, 859.4875, 860.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.