Skip to content

Douglas Fire and EMS Frequencies

We do not have frequencies listed specifically for Douglas in Saunders County, Nebraska yet. Countywide channels for Saunders County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cedar Bluffs (Omaha Regional Interoperability Network (ORION)), about 7 miles away.

About Douglas Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Douglas: County Fire Low Band 39.9800 MHz, FM, no tone; Saunders County Fire 154.1750 MHz, FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Saunders County channels that also cover Douglas

Fire Dispatch

Fire Dispatch frequencies for Saunders County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire Low BandCounty Fire Low Band39.9800FMKAG283
Saunders County FireCounty Fire154.1750FMKAG283

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Saunders County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Saunders County FireMutual Aid/County Fire Paging39.9000FMKNBY451

Nearest trunked radio sites

Distances are measured from the center of Douglas.

Cedar Bluffs · Omaha Regional Interoperability Network (ORION)
RFSS 1 · Site 10 (hex A) · NAC 14A · about 7 mi away
Control 856.3125, 860.4875
Voice 854.8875, 855.3625, 855.4875, 855.9625, 856.4375, 856.7625, 856.9375, 857.4375, 857.9375, 858.2875, 858.3125, 858.4375, 858.4875, 858.9375, 859.2875, 859.3125, 859.3375, 859.4375, 859.4875, 859.9375, 860.3375, 860.4375, 860.9375
Cedar Bluffs · Nebraska State Radio System
RFSS 1 · Site 67 (hex 43) · NAC B80 · about 7 mi away
Control 172.625, 173.9125
Voice 169.7875, 171.2625
Dodge County Simulcast · Omaha Regional Interoperability Network (ORION)
RFSS 1 · Site 13 (hex D) · NAC 14D · about 15 mi away
Control 853.15, 853.375, 853.6625, 853.9125
Voice 851.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Douglas?

We do not have a fire dispatch channel listed specifically for Douglas. The county-level fire dispatch channels in the same county: County Fire Low Band 39.9800 MHz, FM, no tone; Saunders County Fire 154.1750 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Douglas?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Douglas?

For Douglas, start with the Cedar Bluffs site of Omaha Regional Interoperability Network (ORION). Its control channels are 856.3125, 860.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.