About Exeter Fire and EMS Frequencies
Quick answer: Fire dispatch for Exeter: Exeter Fire 154.3025 MHz, P25, NAC 617.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Exeter conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Exeter Fire | Fire Operations | 154.3025 | NAC 617 | P25 | WQCE313 |
Rockingham County channels that also cover Exeter
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pease Air National Guard Base Fire | Fire Operations | 173.5875 | 136.5 PL | FMN | — |
| Seacoast Fire (Rockingham Net) | Seacoast Fire Mutual Aid Dispatch | 154.1900 In 156.0075 | 136.5 PL | FMN | WNEB875 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seacoast Fire (Rockingham Net) | Rock County Fireground | 153.7775 | 131.8 PL | FMN | WNEB875 |
| Seacoast Fire (Rockingham Net) | Seacoast Fire (Rockingham Net) – Fire Ground | 153.8975 | 136.5 PL | FMN | WNEB875 |
| Seacoast Fire (Rockingham Net) | Seacoast Fire (Rockingham Net) – Fire Ground | 153.9725 | 186.2 PL | FMN | WNEB875 |
| Seacoast Fire (Rockingham Net) | South Central Rock County Fireground | 154.1600 | 136.5 PL | FMN | KBT790 |
| Seacoast Fire (Rockingham Net) | Rock County Fireground | 154.4375 | 88.5 PL | FMN | WNEB875 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pease Air National Guard Base Fire | Pease ANG Base Fire | 173.0500 | CSQ | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seacoast Fire (Rockingham Net) | Med-1 EMS-to-Hospital | 155.3400 | 141.3 PL | FMN | KNEM443 |
| Seacoast Fire (Rockingham Net) | Med-2 EMS-to-Hospital (rarely used) | 155.3850 | 141.3 PL | FMN | KNEM443 |
Nearest trunked radio sites
Distances are measured from the center of Exeter.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Exeter?
Fire dispatch channels listed for Exeter: Exeter Fire 154.3025 MHz, P25, NAC 617.
What scanner do I need to listen to fire and EMS in Exeter?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Exeter?
For Exeter, start with the Nashua Simulcast site of Nashua. Its control channels are 852.55, 852.75, 853.2625, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Exeter fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Exeter are marked encrypted.