Skip to content

Dorchester Fire and EMS Frequencies

We do not have frequencies listed specifically for Dorchester in Cumberland County, New Jersey yet. Countywide channels for Cumberland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cumberland County Simulcast (New Jersey Interoperability Communications System (NJICS)), about 10 miles away.

About Dorchester Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dorchester: Cumberland County Fire 154.4300 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Dorchester: Cumberland County EMS 155.2200 MHz, narrow FM, 179.9 PL. Trunked: New Jersey Interoperability Communications System (NJICS), for example Cumberland County Fire talkgroup 3467 (hex d8b).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: New Jersey Interoperability Communications System (NJICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dorchester, start with the Cumberland County Simulcast site of New Jersey Interoperability Communications System (NJICS), about 10 miles away. Its control channels: 772.85625, 773.19375, 773.95625 MHz.

Data updated .

Cumberland County channels that also cover Dorchester

Fire Dispatch

Fire Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCumberland County Fire – Dispatch154.4300179.9 PLFMNKEG393

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCumberland County Fire – Fire Ground154.1750179.9 PLFMNWPDJ987
Cumberland County FireSouth Jersey Network154.2650CSQFMNKNAA943
Cumberland County FireCumberland County Fire – Fire Ground154.3250179.9 PLFMNKEG393
Cumberland County FireFire Command Repeater154.4000
In 159.0000
179.9 PLFMNWPDJ987
Cumberland County FireFire Police Operations156.2100179.9 PLFMNKXK420
Statewide Forest Fire Service - OperationsStatewide Forest Fire Service – Operations159.3750179.9 PLFMNKJD279

EMS Dispatch

EMS Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County EMSCumberland County EMS – Dispatch /Response155.2200179.9 PLFMNWSU218

EMS Talk-around

EMS Talk-around frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County EMSEMS Response155.3250179.9 PLFMNWPDJ987
Statewide EMS NetworkStatewide EMS Network155.2800CSQFMNWSU218

New Jersey Interoperability Communications System (NJICS)

New Jersey Interoperability Communications System (NJICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Cumberland County FireCounty Fire/EMS Dispatch3467d8bT
Cumberland County FireCounty Fire52531485T
Cumberland County FireCounty Fire52551487T
Cumberland County FireCounty Fireground52691495T
Cumberland County EMSCounty EMS5261148dT
Cumberland County EMSCounty EMS5263148fT

Nearest trunked radio sites

Distances are measured from the center of Dorchester.

Cumberland County Simulcast · New Jersey Interoperability Communications System (NJICS)
RFSS 1 · Site 6 (hex 6) · NAC 39C · about 10 mi away
Control 772.85625, 773.19375, 773.95625, 774.33125
Voice 769.28125, 769.78125, 770.03125, 770.29375, 771.04375, 771.54375, 772.03125, 772.31875, 773.68125, 774.21875
Cape May County Simulcast · New Jersey Interoperability Communications System (NJICS)
RFSS 1 · Site 9 (hex 9) · NAC 39B · about 13 mi away
Control 770.78125, 771.16875, 771.69375, 773.30625
Voice 769.53125, 770.11875, 771.41875, 771.98125, 772.23125, 772.55625, 772.99375, 773.49375, 773.91875, 774.70625
Mays Landing/Egg Harbor City · Atlantic County
RFSS 10 · Site 10 (hex A) · NAC 26A · about 19 mi away
Control 851.1375, 851.2, 851.9, 852.1, 852.3625, 852.7, 852.925, 853.325, 853.375, 853.775, 853.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dorchester?

We do not have a fire dispatch channel listed specifically for Dorchester. The county-level fire dispatch channels in the same county: Cumberland County Fire 154.4300 MHz, narrow FM, 179.9 PL.

What frequency does EMS or the ambulance service use in Dorchester?

We do not have a EMS dispatch channel listed specifically for Dorchester. The county-level EMS dispatch channels in the same county: Cumberland County EMS 155.2200 MHz, narrow FM, 179.9 PL.

Do fire departments and EMS use a trunked radio system in Dorchester?

Yes. The county-level systems that cover Dorchester are Fire and EMS talkgroups are listed for New Jersey Interoperability Communications System (NJICS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dorchester?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dorchester?

For Dorchester, start with the Cumberland County Simulcast site of New Jersey Interoperability Communications System (NJICS). Its control channels are 772.85625, 773.19375, 773.95625, 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.