About Bedminster Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bedminster: Countywide Fire/EMS Alerting 470.1375 MHz, narrow FM, 167.9 PL; Somerset County Fire 154.3100 MHz, narrow FM, 100.0 PL. Trunked: Somerset County, for example Fire and EMS talkgroup 803 (hex 323).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Somerset County: 26 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bedminster, start with the Pluckemin site of New Jersey Interoperability Communications System (NJICS), about 3 miles away. Its control channels: 858.70625, 858.96875 MHz.
Data updated .
Somerset County channels that also cover Bedminster
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Countywide Fire/EMS Alerting | Countywide Fire/EMS Alerting | 470.1375 | 167.9 PL | FMN | WQBL360 |
| Somerset County Fire | South County Dispatch | 154.3100 | 100.0 PL | FMN | KRW393 |
| Somerset County Fire | North County Dispatch | 506.9875 In 509.9875 | 100.0 PL | FMN | WIL894 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Municipal EMS Dispatch | Municipal EMS Dispatch | 155.3100 | 100.0 PL | FMN | KCQ249 |
| Somerset County EMS | JEMS 1 Mobilization | 155.2350 | 100.0 PL | FMN | WPUE516 |
| Somerset County EMS | EMS Mobilization | 155.2950 | 100.0 PL | FMN | — |
Somerset County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fire and EMS | Fire Region 1 – North | 803 | 323 | D |
| Fire and EMS | Fire Region 2 – West | 805 | 325 | D |
| Fire and EMS | Fire Region 3 – East | 807 | 327 | D |
| Fire and EMS | Fire Region 4 – Central | 809 | 329 | D |
| Fire and EMS | Fire Region 5 – Franklin | 811 | 32b | D |
| Fire and EMS | Fire Region 6 – South | 813 | 32d | D |
| Fire and EMS | Fire Operations | 815 | 32f | D |
| Fire and EMS | Fire Operations | 817 | 331 | D |
| Fire and EMS | Fire Operations | 819 | 333 | D |
| Fire and EMS | Fire Operations | 821 | 335 | D |
| Fire and EMS | Fire Operations | 823 | 337 | D |
| Fire and EMS | Fire Operations | 825 | 339 | D |
| Fire and EMS | Fire Operations | 827 | 33b | D |
| Fire and EMS | Fire Operations | 829 | 33d | D |
| Fire and EMS | Fire Operations | 831 | 33f | D |
| Fire and EMS | Fire Operations | 833 | 341 | D |
| Office of Emergency Management | Haz-Mat Operations | 213 | d5 | D |
| Office of Emergency Management | Haz-Mat Operations | 215 | d7 | D |
| Fire and EMS | Fire Fleet Call | 801 | 321 | D |
| Fire and EMS | EMS Region 1 | 901 | 385 | D |
| Fire and EMS | EMS Region 2 | 903 | 387 | D |
| Fire and EMS | EMS Operations | 905 | 389 | D |
| Fire and EMS | EMS Operations | 907 | 38b | D |
| Fire and EMS | EMS Operations | 909 | 38d | D |
| Fire and EMS | EMS Operations | 911 | 38f | D |
| Fire and EMS | EMS Fleet Call | 1901 | 76d | T |
Nearest trunked radio sites
Distances are measured from the center of Bedminster.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bedminster?
We do not have a fire dispatch channel listed specifically for Bedminster. The county-level fire dispatch channels in the same county: Countywide Fire/EMS Alerting 470.1375 MHz, narrow FM, 167.9 PL; Somerset County Fire 154.3100 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Bedminster?
Yes. The county-level systems that cover Bedminster are Fire and EMS talkgroups are listed for Somerset County: 26 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bedminster?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bedminster?
For Bedminster, start with the Pluckemin site of New Jersey Interoperability Communications System (NJICS). Its control channels are 858.70625, 858.96875 MHz. Program a control channel first; the scanner finds the voice channels from it.