Skip to content

Isleta Fire and EMS Frequencies

We do not have frequencies listed specifically for Isleta in Bernalillo County, New Mexico yet. Countywide channels for Bernalillo County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Los Lunas VRECC (New Mexico DTRS), about 7 miles away.

About Isleta Fire and EMS Frequencies

Quick answer: Trunked: New Mexico DTRS, for example Bernalillo County Fire & Rescue talkgroup 14610 (hex 3912).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: New Mexico DTRS: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Isleta, start with the Los Lunas VRECC site of New Mexico DTRS, about 7 miles away. Its control channels: 769.65625, 769.93125, 770.43125 MHz.

Data updated .

Bernalillo County channels that also cover Isleta

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bernalillo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Isleta Pueblo FireIsleta Pueblo Fire – Tactical Channel (also used by Police)151.5950151.4 PLFM—

New Mexico DTRS

New Mexico DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Bernalillo County Fire & RescueFire Control Dispatch146103912T
Bernalillo County Fire & RescueSouth Tactical146113913T
Bernalillo County Fire & RescueSouth Tactical146123914T
Bernalillo County Fire & RescueNorth Tactical146133915T
Bernalillo County Fire & RescueNorth Tactical146143916T
Bernalillo County Fire & RescueEast Tactical146153917T
Bernalillo County Fire & RescueEast Tactical146163918T
Bernalillo County Fire & RescueWest Tactical146173919T
Bernalillo County Fire & RescueWest Tactical14618391aT
Bernalillo County Fire & RescueMetro Air Service Unit146323928T
Bernalillo County Fire & RescueStaging14637392dT
Bernalillo County Fire & RescueTraining14619391bT
Bernalillo County Fire & RescueTraining14620391cT

Nearest trunked radio sites

Distances are measured from the center of Isleta.

Los Lunas VRECC · New Mexico DTRS
RFSS 1 · Site 15 (hex F) · NAC 850 · about 7 mi away
Control 769.65625, 769.93125, 770.43125, 770.94375
Voice 774.33125, 774.79375
CNMCF · New Mexico DTRS
RFSS 1 · Site 48 (hex 30) · NAC 850 · about 9 mi away
Control 769.90625, 770.46875, 774.56875
Voice 774.81875
Albuquerque Landfill · New Mexico DTRS
RFSS 1 · Site 10 (hex A) · NAC 850 · about 13 mi away
Control 769.15625, 769.46875, 769.94375, 770.20625
Voice 773.05625, 773.33125, 773.59375, 773.83125, 774.08125, 774.30625, 774.55625, 774.80625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Isleta?

Yes. The county-level systems that cover Isleta are Fire and EMS talkgroups are listed for New Mexico DTRS: 13 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Isleta?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Isleta?

For Isleta, start with the Los Lunas VRECC site of New Mexico DTRS. Its control channels are 769.65625, 769.93125, 770.43125, 770.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.