About Paa-Ko Fire and EMS Frequencies
Quick answer: Trunked: New Mexico DTRS, for example Bernalillo County Fire & Rescue talkgroup 14610 (hex 3912).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: New Mexico DTRS: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Paa-Ko, start with the Sandia Crest (ABQ Metro) site of New Mexico DTRS, about 7 miles away. Its control channels: 769.16875, 769.40625, 769.41875 MHz.
Data updated .
Bernalillo County channels that also cover Paa-Ko
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Isleta Pueblo Fire | Isleta Pueblo Fire – Tactical Channel (also used by Police) | 151.5950 | 151.4 PL | FM | — |
New Mexico DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bernalillo County Fire & Rescue | Fire Control Dispatch | 14610 | 3912 | T |
| Bernalillo County Fire & Rescue | South Tactical | 14611 | 3913 | T |
| Bernalillo County Fire & Rescue | South Tactical | 14612 | 3914 | T |
| Bernalillo County Fire & Rescue | North Tactical | 14613 | 3915 | T |
| Bernalillo County Fire & Rescue | North Tactical | 14614 | 3916 | T |
| Bernalillo County Fire & Rescue | East Tactical | 14615 | 3917 | T |
| Bernalillo County Fire & Rescue | East Tactical | 14616 | 3918 | T |
| Bernalillo County Fire & Rescue | West Tactical | 14617 | 3919 | T |
| Bernalillo County Fire & Rescue | West Tactical | 14618 | 391a | T |
| Bernalillo County Fire & Rescue | Metro Air Service Unit | 14632 | 3928 | T |
| Bernalillo County Fire & Rescue | Staging | 14637 | 392d | T |
| Bernalillo County Fire & Rescue | Training | 14619 | 391b | T |
| Bernalillo County Fire & Rescue | Training | 14620 | 391c | T |
Nearest trunked radio sites
Distances are measured from the center of Paa-Ko.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Paa-Ko?
Yes. The county-level systems that cover Paa-Ko are Fire and EMS talkgroups are listed for New Mexico DTRS: 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Paa-Ko?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Paa-Ko?
For Paa-Ko, start with the Sandia Crest (ABQ Metro) site of New Mexico DTRS. Its control channels are 769.16875, 769.40625, 769.41875, 769.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.