About White Signal Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers White Signal: Lower Mimbres Fire Department 154.4000 MHz, narrow FM, no tone; Sappillo Creek Volunteer Fire and Rescue 154.3700 MHz, narrow FM, no tone; Tyrone Volunteer Fire Department 154.3400 MHz, narrow FM, 131.8 PL. County-level ems dispatch that covers White Signal: Gila Regional EMS Countywide 155.3850 MHz, FM, no tone.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Grant County channels that also cover White Signal
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lower Mimbres Fire Department | Lower Mimbres Fire Department | 154.4000 In 153.9500 | FMN | WNWD400 | |
| Sappillo Creek Volunteer Fire and Rescue | Sappillo Creek Volunteer Fire and Rescue | 154.3700 In 153.7700 | FMN | KNNL462 | |
| Tyrone Volunteer Fire Department | Tyrone Volunteer Fire Department | 154.3400 In 158.9250 | 131.8 PL | FMN | WPML397 |
| Upper Mimbres Fire and Rescue | Upper Mimbres Fire and Rescue | 154.3700 | FMN | WPIQ875 | |
| Whiskey Creek Fire Department | Whiskey Creek Fire Department | 154.1600 | FMN | KNFE749 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gila Regional EMS Countywide | Gila Regional EMS Countywide | 155.3850 In 150.7750 | FM | WNZR989 |
Nearest trunked radio sites
Distances are measured from the center of White Signal.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in White Signal?
We do not have a fire dispatch channel listed specifically for White Signal. The county-level fire dispatch channels in the same county: Lower Mimbres Fire Department 154.4000 MHz, narrow FM, no tone; Sappillo Creek Volunteer Fire and Rescue 154.3700 MHz, narrow FM, no tone; Tyrone Volunteer Fire Department 154.3400 MHz, narrow FM, 131.8 PL; Upper Mimbres Fire and Rescue 154.3700 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in White Signal?
We do not have a EMS dispatch channel listed specifically for White Signal. The county-level EMS dispatch channels in the same county: Gila Regional EMS Countywide 155.3850 MHz, FM, no tone.
What scanner do I need to listen to fire and EMS in White Signal?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in White Signal?
For White Signal, start with the Jacks Peak site of New Mexico DTRS. Its control channels are 769.65625, 769.93125, 770.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.