About Monument Fire and EMS Frequencies
Quick answer: Fire dispatch for Monument: Monument Fire Department 154.3550 MHz, FM, 141.3 PL. Trunked: Lea County Communication Authority (P25) (Project 25), for example Lea County Fire talkgroup 51124 (hex c7b4).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Lea County Communication Authority (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Monument, start with the Hobbs site of New Mexico DTRS, about 11 miles away. Its control channels: 769.70625, 769.95625, 770.41875 MHz.
Data updated .
Monument conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Monument Fire Department | Monument Fire Department – Dispatch | 154.3550 In 153.8900 | 141.3 PL | FM | — |
Lea County channels that also cover Monument
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knowles Fire Department | Knowles Fire Department – Dispatch | 154.4150 In 150.7900 | 127.3 PL | FM | KNDL408 |
| Maljamar VFD Fire | Maljamar Volunteer Fire Department Fire – Dispatch | 153.9500 In 154.4300 | 141.3 PL | FM | KVP765 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lea County Fire | Fire Statewide Mutual Aid | 154.3100 | FM | KNDL408 |
Lea County Communication Authority (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lea County Fire | Lea County Fire – Dispatch | 51124 | c7b4 | D |
| Lea County EMS | Fire Rescue Operations | 50725 | c625 | D |
Nearest trunked radio sites
Distances are measured from the center of Monument.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Monument?
Fire dispatch channels listed for Monument: Monument Fire Department 154.3550 MHz, FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Monument?
Yes. The county-level systems that cover Monument are Fire and EMS talkgroups are listed for Lea County Communication Authority (P25) (Project 25): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Monument?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Monument?
For Monument, start with the Hobbs site of New Mexico DTRS. Its control channels are 769.70625, 769.95625, 770.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Monument fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Monument are marked encrypted.