About La Bajada Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers La Bajada: Santa Fe County Fire 154.0100 MHz, narrow FM, 156.7 PL. Trunked: New Mexico DTRS, for example Santa Fe County Fire talkgroup 9101 (hex 238d).
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: New Mexico DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For La Bajada, start with the Santa Fe Simulcast site of New Mexico DTRS, about 13 miles away. Its control channels: 854.4625, 855.4625, 855.9875 MHz.
Data updated .
Santa Fe County channels that also cover La Bajada
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Santa Fe County Fire | Fire Backup | 154.0100 In 159.4500 | 156.7 PL | FMN | WRYR690 |
| Santa Fe County Fire | Santa Fe County Fire – Dispatch | 154.4150 In 158.9700 | 156.7 PL | FMN | WPXL960 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Santa Fe County Fire | Fire Nambe | 151.0400 In 156.0750 | CSQ | FMN | WQOM226 |
| Santa Fe County Fire | Santa Fe County Fire – Tactical Channel | 153.8000 | 156.7 PL | FMN | WNDE752 |
| Santa Fe County Fire | Santa Fe County Fire – Tactical Channel | 153.9950 | 156.7 PL | FMN | WRZT614 |
| Santa Fe County Fire | Santa Fe County Fire – Tactical Channel | 154.1300 | 156.7 PL | FMN | WNGX583 |
| Santa Fe County Fire | Santa Fe County Fire – Tactical Channel | 154.1900 | 156.7 PL | FMN | WNGX583 |
| Santa Fe County Fire | Fire State Penitentiary | 154.2350 In 150.7750 | CSQ | FMN | WPMY643 |
| Santa Fe County Fire | Santa Fe County Fire – Tactical Channel | 154.2650 | 156.7 PL | FMN | WNGX583 |
| Santa Fe County Fire | Santa Fe County Fire – Tactical Channel | 154.3850 | 156.7 PL | FMN | WNGX583 |
| Santa Fe County Fire | Fire Buffalo Thunder | 154.9950 In 150.7900 | CSQ | FMN | WPMG264 |
New Mexico DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Santa Fe County Fire | County Fire | 9101 | 238d | T |
| Santa Fe County Fire | County Fire | 9102 | 238e | T |
Nearest trunked radio sites
Distances are measured from the center of La Bajada.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in La Bajada?
We do not have a fire dispatch channel listed specifically for La Bajada. The county-level fire dispatch channels in the same county: Santa Fe County Fire 154.0100 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in La Bajada?
Yes. The county-level systems that cover La Bajada are Fire and EMS talkgroups are listed for New Mexico DTRS: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in La Bajada?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in La Bajada?
For La Bajada, start with the Santa Fe Simulcast site of New Mexico DTRS. Its control channels are 854.4625, 855.4625, 855.9875, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.