About Highland Meadows Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Highland Meadows: Valencia County Fire 154.3850 MHz, narrow FM, 141.3 PL. Trunked: New Mexico DTRS, for example Valencia County Fire talkgroup 15200 (hex 3b60).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: New Mexico DTRS: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Highland Meadows, start with the Albuquerque Landfill site of New Mexico DTRS, about 18 miles away. Its control channels: 769.15625, 769.46875, 769.94375 MHz.
Data updated .
Valencia County channels that also cover Highland Meadows
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Valencia County Fire | County Fire – Fire Control | 154.3850 In 153.8300 | 141.3 PL | FMN | WPWR435 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Local Simplex Frequency | 146.4200 | FM | — |
New Mexico DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Valencia County Fire | Valencia County Fire – Dispatch | 15200 | 3b60 | T |
| New Mexico State Fire | Wildland | 15220 | 3b74 | T |
| Valencia County Fire | Fire Operations | 15201 | 3b61 | T |
| Valencia County Fire | Fire Operations | 15202 | 3b62 | T |
| Valencia County Fire | Fire Operations | 15203 | 3b63 | T |
| Valencia County Fire | Fire Operations | 15204 | 3b64 | T |
| Valencia County Fire | Fire Operations | 15205 | 3b65 | T |
Nearest trunked radio sites
Distances are measured from the center of Highland Meadows.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Highland Meadows?
We do not have a fire dispatch channel listed specifically for Highland Meadows. The county-level fire dispatch channels in the same county: Valencia County Fire 154.3850 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Highland Meadows?
Yes. The county-level systems that cover Highland Meadows are Fire and EMS talkgroups are listed for New Mexico DTRS: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Highland Meadows?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Highland Meadows?
For Highland Meadows, start with the Albuquerque Landfill site of New Mexico DTRS. Its control channels are 769.15625, 769.46875, 769.94375, 770.20625 MHz. Program a control channel first; the scanner finds the voice channels from it.