About Fillmore Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fillmore: Allegany County Fire 155.5425 MHz, narrow FM, 127.3 PL. Trunked: Cattaraugus County Public Safety, for example Allegany County Fire talkgroup 8026 (hex 1f5a).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Cattaraugus County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fillmore, start with the Simulcast site of Livingston County, about 24 miles away. Its control channels: 155.595, 155.7975 MHz.
Data updated .
Allegany County channels that also cover Fillmore
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allegany County Fire | Fire/EMS Dispatch | 155.5425 In 159.1275 | 127.3 PL | FMN | WQNA318 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allegany County Fire | Allegany County Fire – Fire Ground | 153.7925 | 065 DPL | FMN | WQNF363 |
| Allegany County Fire | Fireground 5 FAST Team | 153.8075 | 116 DPL | FMN | KAR803 |
| Allegany County Fire | Allegany County Fire – Fire Ground | 153.8825 | 271 DPL | FMN | WQNF363 |
| Allegany County Fire | Allegany County Fire – Fire Ground | 154.0100 | 503 DPL | FMN | WQNF363 |
| Allegany County Fire | Fire B (Response) | 155.1450 In 159.1575 | 192.8 PL | FMN | WQNA318 |
| Allegany County Fire | Allegany County Fire – Fire Ground | 155.5275 | 131 DPL | FMN | WQNF363 |
| Allegany County Fire | Fire Police | 156.0300 | 445 DPL | FMN | WQNF363 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allegany County Hospital | EMS to Hospital (Med 1) Madison Hill | 463.0000 In 468.0000 | 162.2 PL | FMN | WNPH567 |
| Allegany County Hospital | EMS to Hospital (Med 1) Corbin Hill | 463.0000 In 468.0000 | 151.4 PL | FMN | WNPH567 |
Cattaraugus County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Allegany County Fire | Fire Private | 8026 | 1f5a | D |
| Allegany County EMS | EMS Private | 8027 | 1f5b | D |
Nearest trunked radio sites
Distances are measured from the center of Fillmore.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fillmore?
We do not have a fire dispatch channel listed specifically for Fillmore. The county-level fire dispatch channels in the same county: Allegany County Fire 155.5425 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Fillmore?
Yes. The county-level systems that cover Fillmore are Fire and EMS talkgroups are listed for Cattaraugus County Public Safety: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fillmore?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fillmore?
For Fillmore, start with the Simulcast site of Livingston County. Its control channels are 155.595, 155.7975 MHz. Program a control channel first; the scanner finds the voice channels from it.