Skip to content

Johnson City Fire and EMS Frequencies

We do not have frequencies listed specifically for Johnson City in Broome County, New York yet. Countywide channels for Broome County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Cortland County Public Safety), about 33 miles away.

About Johnson City Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Johnson City: Broome County Fire 159.1050 MHz, narrow FM, 85.4 PL; Union Center Fire 155.9025 MHz, narrow FM, 371 DPL; Western Broome Fire Departments 154.3100 MHz, narrow FM, 103.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 5 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Broome County channels that also cover Johnson City

Fire Dispatch

Fire Dispatch frequencies for Broome County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broome County FireBroome County Fire – Dispatch159.105085.4 PLFMNWQXU816
Union Center FireBattalion 3 Dispatch (Rebroadcast of TG 27103)155.9025371 DPLFMNKCJ960
Western Broome Fire DepartmentsBattalion 3 Dispatch (Rebroadcast of TG 27103)154.3100103.5 PLFMNKCJ960

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Broome County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broome County FireTactical 12D453.1875NAC 293P25WRJQ426
Broome County FireFire Police Tactical 9D453.2500143 DPLFMNWRJQ426
Broome County FireHazmat Tactical 2D458.3250NAC 293P25 EncryptedWRJQ426
Broome County FireHazmat Tactical 3D458.9125NAC 293P25 EncryptedWRJQ426
Broome County FireTactical 10D460.5500NAC 293P25WRJQ426
Broome County FireTactical 11D465.3125NAC 293P25WRJQ426

Nearest trunked radio sites

Distances are measured from the center of Johnson City.

Simulcast · Cortland County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 4e1 · about 33 mi away
Control 454.05, 454.075, 454.225
Voice 454.275, 454.4, 454.5, 454.625
Simulcast · Tompkins County Public Safety
RFSS 1 · Site 2 (hex 2) · NAC 1E0 · about 34 mi away
Control 856.6875, 857.6875, 858.6875, 859.8875
Voice 854.0125, 854.3125, 854.4875, 854.9375, 855.0125, 855.3125
NYS Fairgrounds · Metro-25/MTA MRRS
RFSS 22 · Site 22 (hex 16) · NAC 904 · about 67 mi away
Control 773.96875, 774.21875, 774.46875, 774.91875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Johnson City?

We do not have a fire dispatch channel listed specifically for Johnson City. The county-level fire dispatch channels in the same county: Broome County Fire 159.1050 MHz, narrow FM, 85.4 PL; Union Center Fire 155.9025 MHz, narrow FM, 371 DPL; Western Broome Fire Departments 154.3100 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Johnson City?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Johnson City?

For Johnson City, start with the Simulcast site of Cortland County Public Safety. Its control channels are 454.05, 454.075, 454.225 MHz. Program a control channel first; the scanner finds the voice channels from it.