About Whitney Point Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Whitney Point: Broome County Fire 159.1050 MHz, narrow FM, 85.4 PL; Union Center Fire 155.9025 MHz, narrow FM, 371 DPL; Western Broome Fire Departments 154.3100 MHz, narrow FM, 103.5 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 5 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Broome County channels that also cover Whitney Point
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Broome County Fire | Broome County Fire – Dispatch | 159.1050 | 85.4 PL | FMN | WQXU816 |
| Union Center Fire | Battalion 3 Dispatch (Rebroadcast of TG 27103) | 155.9025 | 371 DPL | FMN | KCJ960 |
| Western Broome Fire Departments | Battalion 3 Dispatch (Rebroadcast of TG 27103) | 154.3100 | 103.5 PL | FMN | KCJ960 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Broome County Fire | Tactical 12D | 453.1875 | NAC 293 | P25 | WRJQ426 |
| Broome County Fire | Fire Police Tactical 9D | 453.2500 | 143 DPL | FMN | WRJQ426 |
| Broome County Fire | Hazmat Tactical 2D | 458.3250 | NAC 293 | P25 Encrypted | WRJQ426 |
| Broome County Fire | Hazmat Tactical 3D | 458.9125 | NAC 293 | P25 Encrypted | WRJQ426 |
| Broome County Fire | Tactical 10D | 460.5500 | NAC 293 | P25 | WRJQ426 |
| Broome County Fire | Tactical 11D | 465.3125 | NAC 293 | P25 | WRJQ426 |
Nearest trunked radio sites
Distances are measured from the center of Whitney Point.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Whitney Point?
We do not have a fire dispatch channel listed specifically for Whitney Point. The county-level fire dispatch channels in the same county: Broome County Fire 159.1050 MHz, narrow FM, 85.4 PL; Union Center Fire 155.9025 MHz, narrow FM, 371 DPL; Western Broome Fire Departments 154.3100 MHz, narrow FM, 103.5 PL.
What scanner do I need to listen to fire and EMS in Whitney Point?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Whitney Point?
For Whitney Point, start with the Simulcast site of Cortland County Public Safety. Its control channels are 454.05, 454.075, 454.225 MHz. Program a control channel first; the scanner finds the voice channels from it.