Skip to content

Bloomville Fire and EMS Frequencies

We do not have frequencies listed specifically for Bloomville in Delaware County, New York yet. Countywide channels for Delaware County that may also cover this area are shown below when we have them. The closest trunked radio site we have is New Scotland (Capital Digitronics (Capital District Public Safety)), about 46 miles away.

About Bloomville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bloomville: Delaware County Fire 155.1375 MHz, narrow FM, 91.5 PL; Pindars Corners Fire 453.4250 MHz, narrow FM, 131.8 PL.

  • 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Delaware County channels that also cover Bloomville

Fire Dispatch

Fire Dispatch frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delaware County FireFire Paging155.137591.5 PLFMNWRBL394
Delaware County FireFire Response453.5375
In 458.5375
203.5 PLFMNWQOT899
Pindars Corners FirePindars Corners Fire – Dispatch (Simulcast from 911)453.4250
In 458.4250
131.8 PLFMNWQRL614

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delaware County FireDelaware County Fire – Tactical Channel453.5625
In 458.5625
110.9 PLFMNWQOT899
Delaware County FireDelaware County Fire – Fire Ground453.9250218.1 PLFMNWRAW255
Delaware County FireDelaware County Fire – Fire Ground458.9250241.8 PLFMNWRAW255
Delaware County FireDelaware County Fire – Tactical Channel460.1500
In 465.1500
97.4 PLFMNWQOT899
Delaware County FireDelaware County Fire – Tactical Channel460.4625
In 465.4625
131.8 PLFMNWQOT899
Delaware County FireDelaware County Fire – Fire Ground460.6250229.1 PLFMNWRAW255
Grand Gorge FireOperations153.2150
In 158.3100
110.9 PLFMNWPQJ280
Middletown-Hardenberg FireOperations154.1975
In 159.2925
FMNWQCM651
Trout Creek FireOperations453.1500
In 458.1500
FMNWQPH228

Nearest trunked radio sites

Distances are measured from the center of Bloomville.

New Scotland · Capital Digitronics (Capital District Public Safety)
Site 2 (hex 2) · about 46 mi away
Voice 0, 854.1625, 854.7375, 856.3375, 857.3375, 858.3375, 859.3375, 860.3375
Albany County Simulcast · Albany/Schenectady Counties
RFSS 1 · Site 2 (hex 2) · NAC 692 · about 47 mi away
Control 852.95, 853.7375, 854.0375, 854.5375
Voice 851.7375, 852.1875, 854.9875, 856.2125, 856.9375, 857.9375, 858.7125, 860.2125
Schenectady County Simulcast · Albany/Schenectady Counties
RFSS 1 · Site 4 (hex 4) · NAC 694 · about 50 mi away
Control 851.2875, 851.85, 852.075
Voice 852.35
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bloomville?

We do not have a fire dispatch channel listed specifically for Bloomville. The county-level fire dispatch channels in the same county: Delaware County Fire 155.1375 MHz, narrow FM, 91.5 PL; Pindars Corners Fire 453.4250 MHz, narrow FM, 131.8 PL.

What scanner do I need to listen to fire and EMS in Bloomville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bloomville?

For Bloomville, start with the Albany County Simulcast site of Albany/Schenectady Counties. Its control channels are 852.95, 853.7375, 854.0375, 854.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.