Skip to content

Willsboro Point Fire and EMS Frequencies

We do not have frequencies listed specifically for Willsboro Point in Essex County, New York yet. Countywide channels for Essex County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Clinton County), about 26 miles away.

About Willsboro Point Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Willsboro Point: Essex County Fire 46.4600 MHz, FM, CSQ; Keene Valley Fire 46.4400 MHz, FM, CSQ. County-level ems dispatch that covers Willsboro Point: Essex County EMS 151.1000 MHz, P25, NAC 283.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 10 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Essex County channels that also cover Willsboro Point

Fire Dispatch

Fire Dispatch frequencies for Essex County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Essex County FireFire/EMS Alerting46.4600CSQFMWNXK687
Essex County FireFire Control Belfry154.1450NAC 282P25WQLI541
Essex County FireFire Control Angier/Pisgah156.2250NAC 282P25WQLI541
Essex County FireFire Control Defiance159.0450NAC 282P25WQLI541
Essex County FireFire Control Whiteface159.0450NAC 282P25WQLI541
Essex County FireFire Control Gore161.8375
In 157.2375
NAC 282P25WQQH430
Essex County FireUHF to Low Band Link from Belfry to Gore453.9250167.9 PLFMNWQGK545
Keene Valley FireKeene Valley Fire District46.4400CSQFMKNIP351

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Essex County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chilson FireChilson Fire – Fire Ground155.1000
In 159.3900
FMNWQAY295
Essex County Fire OpsEssex County Fire Operations156.1200445 DPLFMNWQLI541

EMS Dispatch

EMS Dispatch frequencies for Essex County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Essex County EMSDispatch Defiance151.1000NAC 283P25WQLI541
Essex County EMSDispatch Gore153.8450NAC 283P25WQLI541
Essex County EMSDispatch Whiteface154.1000NAC 283P25WQLI541
Essex County EMSDispatch Belfry156.1350NAC 283P25WQLI541
Essex County EMSDispatch Angier/Pisgah161.9250
In 157.3250
NAC 283P25WQQH430

EMS Tactical

EMS Tactical frequencies for Essex County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Essex County EMS OpsEssex County EMS Operations155.2950445 DPLFMNWQLI541

EMS Talk-around

EMS Talk-around frequencies for Essex County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Essex County EMSEssex County EMS – Elizabethtown-Lewis155.2650131.8 PLFMNWNXK672

Hospitals & Medical

Hospitals & Medical frequencies for Essex County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Elizabethtown Community HospitalEMS to Elizabethtown Hospital155.2800FMNKED218
Essex County HospitalEMS to Champlain Valley Physician's Hospital (Plattsburgh)155.2950FMNWNXK672
Moses Ludington HospitalMoses Ludington Hospital155.1750FMNKUV750

Nearest trunked radio sites

Distances are measured from the center of Willsboro Point.

Simulcast · Clinton County
RFSS 1 · Site 1 (hex 1) · NAC 9D1 · about 26 mi away
Control 852.3625, 852.5625, 852.8125, 853.0625
Voice 851.8875, 852.1625
North Simulcast · Saratoga County Public Safety
RFSS 1 · Site 2 (hex 2) · NAC 3C0 · about 83 mi away
Control 851.225, 851.4125, 852.6, 852.85
Easton · Capital Digitronics (Capital District Public Safety)
Site 3 (hex 3) · about 97 mi away
Voice 854.7625, 855.0625, 856.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Willsboro Point?

We do not have a fire dispatch channel listed specifically for Willsboro Point. The county-level fire dispatch channels in the same county: Essex County Fire 46.4600 MHz, FM, CSQ; Keene Valley Fire 46.4400 MHz, FM, CSQ.

What frequency does EMS or the ambulance service use in Willsboro Point?

We do not have a EMS dispatch channel listed specifically for Willsboro Point. The county-level EMS dispatch channels in the same county: Essex County EMS 151.1000 MHz, P25, NAC 283.

What scanner do I need to listen to fire and EMS in Willsboro Point?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Willsboro Point?

For Willsboro Point, start with the Simulcast site of Clinton County. Its control channels are 852.3625, 852.5625, 852.8125, 853.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.