About Witherbee Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Witherbee: Essex County Fire 46.4600 MHz, FM, CSQ; Keene Valley Fire 46.4400 MHz, FM, CSQ. County-level ems dispatch that covers Witherbee: Essex County EMS 151.1000 MHz, P25, NAC 283.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 10 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Essex County channels that also cover Witherbee
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Essex County Fire | Fire/EMS Alerting | 46.4600 | CSQ | FM | WNXK687 |
| Essex County Fire | Fire Control Belfry | 154.1450 | NAC 282 | P25 | WQLI541 |
| Essex County Fire | Fire Control Angier/Pisgah | 156.2250 | NAC 282 | P25 | WQLI541 |
| Essex County Fire | Fire Control Defiance | 159.0450 | NAC 282 | P25 | WQLI541 |
| Essex County Fire | Fire Control Whiteface | 159.0450 | NAC 282 | P25 | WQLI541 |
| Essex County Fire | Fire Control Gore | 161.8375 In 157.2375 | NAC 282 | P25 | WQQH430 |
| Essex County Fire | UHF to Low Band Link from Belfry to Gore | 453.9250 | 167.9 PL | FMN | WQGK545 |
| Keene Valley Fire | Keene Valley Fire District | 46.4400 | CSQ | FM | KNIP351 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chilson Fire | Chilson Fire – Fire Ground | 155.1000 In 159.3900 | FMN | WQAY295 | |
| Essex County Fire Ops | Essex County Fire Operations | 156.1200 | 445 DPL | FMN | WQLI541 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Essex County EMS | Dispatch Defiance | 151.1000 | NAC 283 | P25 | WQLI541 |
| Essex County EMS | Dispatch Gore | 153.8450 | NAC 283 | P25 | WQLI541 |
| Essex County EMS | Dispatch Whiteface | 154.1000 | NAC 283 | P25 | WQLI541 |
| Essex County EMS | Dispatch Belfry | 156.1350 | NAC 283 | P25 | WQLI541 |
| Essex County EMS | Dispatch Angier/Pisgah | 161.9250 In 157.3250 | NAC 283 | P25 | WQQH430 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Essex County EMS Ops | Essex County EMS Operations | 155.2950 | 445 DPL | FMN | WQLI541 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Essex County EMS | Essex County EMS – Elizabethtown-Lewis | 155.2650 | 131.8 PL | FMN | WNXK672 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Elizabethtown Community Hospital | EMS to Elizabethtown Hospital | 155.2800 | FMN | KED218 | |
| Essex County Hospital | EMS to Champlain Valley Physician's Hospital (Plattsburgh) | 155.2950 | FMN | WNXK672 | |
| Moses Ludington Hospital | Moses Ludington Hospital | 155.1750 | FMN | KUV750 |
Nearest trunked radio sites
Distances are measured from the center of Witherbee.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Witherbee?
We do not have a fire dispatch channel listed specifically for Witherbee. The county-level fire dispatch channels in the same county: Essex County Fire 46.4600 MHz, FM, CSQ; Keene Valley Fire 46.4400 MHz, FM, CSQ.
What frequency does EMS or the ambulance service use in Witherbee?
We do not have a EMS dispatch channel listed specifically for Witherbee. The county-level EMS dispatch channels in the same county: Essex County EMS 151.1000 MHz, P25, NAC 283.
What scanner do I need to listen to fire and EMS in Witherbee?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Witherbee?
For Witherbee, start with the Simulcast site of Clinton County. Its control channels are 852.3625, 852.5625, 852.8125, 853.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.