About Corfu Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Corfu: Genesee County Fire 154.8750 MHz, narrow FM, CSQ. Trunked: Genesee/Orleans Counties, for example Genesee County Fire/EMS talkgroup 10029 (hex 272d).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Genesee/Orleans Counties: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Corfu, start with the Genesee County Simulcast site of Genesee/Orleans Counties, about 11 miles away. Its control channels: 851.2875, 851.4625, 851.9125 MHz.
Data updated .
Genesee County channels that also cover Corfu
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Genesee County Fire | Genesee County Fire – Dispatch | 154.8750 | CSQ | FMN | WQTH583 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Genesee County Fire | Fire Department On Scene Talk Around | 866.0125 | 156.7 PL | FM | — |
Genesee/Orleans Counties
System ID 229
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Genesee County Fire/EMS | Fire/EMS Dispatch | 10029 | 272d | T |
| Genesee County Fire/EMS | Fire Command | 10031 | 272f | T |
| Genesee County Fire/EMS | West Operations | 10035 | 2733 | T |
| Genesee County Fire/EMS | East Operations | 10037 | 2735 | T |
| Genesee County Fire/EMS | East Operations | 10065 | 2751 | T |
| Genesee County Fire/EMS | Emergency Revert | 10125 | 278d | T |
| Genesee County Fire/EMS | Fire Water Supply | 10137 | 2799 | T |
| Genesee County Fire/EMS | West Battalion | 10157 | 27ad | T |
| Genesee County Fire/EMS | East Operations | 10159 | 27af | T |
| Genesee County Fire/EMS | East Battalion | 10161 | 27b1 | T |
| Genesee County Fire/EMS | West Operations | 10163 | 27b3 | T |
| Genesee County Fire/EMS | West Operations | 10165 | 27b5 | T |
| Genesee County Fire/EMS | Fire Police | 10107 | 277b | T |
| Genesee County Fire/EMS | EMS Battalion | 10033 | 2731 | T |
| Genesee County Fire/EMS | EMS to Hospital | 10123 | 278b | T |
Nearest trunked radio sites
Distances are measured from the center of Corfu.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Corfu?
We do not have a fire dispatch channel listed specifically for Corfu. The county-level fire dispatch channels in the same county: Genesee County Fire 154.8750 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Corfu?
Yes. The county-level systems that cover Corfu are Fire and EMS talkgroups are listed for Genesee/Orleans Counties: 15 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Corfu?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Corfu?
For Corfu, start with the Genesee County Simulcast site of Genesee/Orleans Counties. Its control channels are 851.2875, 851.4625, 851.9125, 852.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.