Skip to content

Oxbow Fire and EMS Frequencies

We do not have frequencies listed specifically for Oxbow in Jefferson County, New York yet. Countywide channels for Jefferson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Lewis County), about 33 miles away.

About Oxbow Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Oxbow: Fire and EMS 155.1450 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Oxbow: Fire and EMS 155.4000 MHz, narrow FM, 123.0 PL.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Jefferson County channels that also cover Oxbow

Fire Dispatch

Fire Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSFire/EMS VHF Paging155.1450123.0 PLFMNWQWJ720

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSFire Direct453.0875100.0 PLFMNWQTP717
Fire and EMSEvent Direct453.1125100.0 PLFMNWQTP717
Fire and EMSEvent Direct453.9125100.0 PLFMNWQTP717
Fire and EMSFire Direct453.9625100.0 PLFMNWQTP717
Fire and EMSFire Direct453.9875100.0 PLFMNWQTP717

EMS Dispatch

EMS Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSGuilfoyle EMS Dispatch155.4000
In 150.7750
123.0 PLFMNKNGY668

EMS Tactical

EMS Tactical frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSEMS Direct465.4875100.0 PLFMNWQTP717
Fire and EMSEMS Direct465.5125100.0 PLFMNWQTP717

Nearest trunked radio sites

Distances are measured from the center of Oxbow.

Simulcast · Lewis County
RFSS 1 · Site 1 (hex 1) · NAC 70D · about 33 mi away
Control 453.15, 453.2625, 453.3125, 453.3625, 453.55
NYS Fairgrounds · Metro-25/MTA MRRS
RFSS 22 · Site 22 (hex 16) · NAC 904 · about 89 mi away
Control 773.96875, 774.21875, 774.46875, 774.91875
Simulcast · Clinton County
RFSS 1 · Site 1 (hex 1) · NAC 9D1 · about 101 mi away
Control 852.3625, 852.5625, 852.8125, 853.0625
Voice 851.8875, 852.1625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Oxbow?

We do not have a fire dispatch channel listed specifically for Oxbow. The county-level fire dispatch channels in the same county: Fire and EMS 155.1450 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Oxbow?

We do not have a EMS dispatch channel listed specifically for Oxbow. The county-level EMS dispatch channels in the same county: Fire and EMS 155.4000 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Oxbow?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Oxbow?

For Oxbow, start with the Simulcast site of Lewis County. Its control channels are 453.15, 453.2625, 453.3125, 453.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.