Skip to content

Hemlock Fire and EMS Frequencies

We do not have frequencies listed specifically for Hemlock in Livingston County, New York yet. Countywide channels for Livingston County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Canadice Corners (Monroe/Ontario Counties), about 5 miles away.

About Hemlock Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hemlock: Livingston County Fire 151.0550 MHz, narrow FM, 125 DPL. Trunked: Livingston County, for example Countywide Fire/EMS talkgroup 95 (hex 5f).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Livingston County: 26 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hemlock, start with the Canadice Corners site of Monroe/Ontario Counties, about 5 miles away. Its control channels: 854.0375, 854.2875, 854.5625 MHz.

Data updated .

Livingston County channels that also cover Hemlock

Fire Dispatch

Fire Dispatch frequencies for Livingston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Livingston County FireFire/EMS Paging151.0550
In 159.0000
125 DPLFMNKEI205

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Livingston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Livingston County FireRIT/FAST151.3475179.9 PLFMNWQKK587
Livingston County FireDirect153.7775306 DPLFMNKEA535
Livingston County FireDirect154.4225205 DPLFMNKEA535
Livingston County FireDirect158.9550411 DPLFMNKEA535

Livingston County

Livingston County talkgroups
AgencyDescriptionTalkgroupHexMode
Countywide Fire/EMSCountywide Fire/EMS – Dispatch955fT
Outside Counties FireWyoming County Fire Patch11674T
Countywide Fire/EMSOperations9660T
Countywide Fire/EMSOperations9761T
Countywide Fire/EMSOperations9862T
Countywide Fire/EMSOperations9963T
Countywide Fire/EMSOperations10064T
Countywide Fire/EMSOperations10165T
Countywide Fire/EMSOperations202caT
Countywide Fire/EMSOperations204ccT
Countywide Fire/EMSOperations205cdT
Countywide Fire/EMSOperations206ceT
Countywide Fire/EMSOperations208d0T
Countywide Fire/EMSOperations223dfT
Countywide Fire/EMSFire Police30012cT
Countywide Fire/EMSFire Police30112dT
Countywide Fire/EMSFire Police30212eT
Countywide Fire/EMSFire Police30312fT
Countywide Fire/EMSLink to 45.88 (LFIRE4D)458811ecT
Countywide Fire/EMSFire Coordinators1086cT
Countywide Fire/EMSEMS Operations10266T
Countywide Fire/EMSEMS Operations10367T
Countywide Fire/EMSEMS Operations10468T
Countywide Fire/EMSEMS Operations10569T
Countywide Fire/EMSEMS Operations1066aT
Countywide Fire/EMSEMS Operations1076bT

Nearest trunked radio sites

Distances are measured from the center of Hemlock.

Canadice Corners · Monroe/Ontario Counties
RFSS 40 · Site 40 (hex 28) · NAC 47F · about 5 mi away
Control 854.0375, 854.2875, 854.5625, 855.2375
Simulcast · Livingston County
RFSS 1 · Site 1 (hex 1) · NAC 8B1 · about 10 mi away
Control 155.595, 155.7975
Voice 158.76, 158.8275
Ontario South Simulcast · Monroe/Ontario Counties
RFSS 80 · Site 80 (hex 50) · NAC 47F · about 11 mi away
Control 769.25625, 769.78125, 770.08125, 773.93125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hemlock?

We do not have a fire dispatch channel listed specifically for Hemlock. The county-level fire dispatch channels in the same county: Livingston County Fire 151.0550 MHz, narrow FM, 125 DPL.

Do fire departments and EMS use a trunked radio system in Hemlock?

Yes. The county-level systems that cover Hemlock are Fire and EMS talkgroups are listed for Livingston County: 26 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hemlock?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hemlock?

For Hemlock, start with the Canadice Corners site of Monroe/Ontario Counties. Its control channels are 854.0375, 854.2875, 854.5625, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.