Skip to content

Earlville Fire and EMS Frequencies

We do not have frequencies listed specifically for Earlville in Madison County, New York yet. Countywide channels for Madison County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Cortland County Public Safety), about 28 miles away.

Earlville also extends into Chenango County.

About Earlville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Earlville: Madison County Fire 460.0625 MHz, narrow FM, CSQ.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Madison County channels that also cover Earlville

Fire Dispatch

Fire Dispatch frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County FireFire/EMS Alerting (Simulcast of TG 7477 Fire Dispatch)460.0625CSQFMNWQLN443

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County FireMadison County Fire – Tactical Channel453.0875156.7 PLFMNWQOH963
Madison County FireMadison County Fire – Tactical Channel453.9125156.7 PLFMNWQOH963
Madison County FireMadison County Fire – Tactical Channel453.9375156.7 PLFMNWQOH963
Madison County FireFire Police458.9875156.7 PLFMNWQOH963

EMS Tactical

EMS Tactical frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County EMSEMS Operations (Simulcast of TG 7301 Operations 1)453.1625CSQFMNWQLN443

Nearest trunked radio sites

Distances are measured from the center of Earlville.

Simulcast · Cortland County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 4e1 · about 28 mi away
Control 454.05, 454.075, 454.225
Voice 454.275, 454.4, 454.5, 454.625
NYS Fairgrounds · Metro-25/MTA MRRS
RFSS 22 · Site 22 (hex 16) · NAC 904 · about 41 mi away
Control 773.96875, 774.21875, 774.46875, 774.91875
Simulcast · Tompkins County Public Safety
RFSS 1 · Site 2 (hex 2) · NAC 1E0 · about 51 mi away
Control 856.6875, 857.6875, 858.6875, 859.8875
Voice 854.0125, 854.3125, 854.4875, 854.9375, 855.0125, 855.3125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Earlville?

We do not have a fire dispatch channel listed specifically for Earlville. The county-level fire dispatch channels in the same county: Madison County Fire 460.0625 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Earlville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Earlville?

For Earlville, start with the Simulcast site of Cortland County Public Safety. Its control channels are 454.05, 454.075, 454.225 MHz. Program a control channel first; the scanner finds the voice channels from it.