Skip to content

Munnsville Fire and EMS Frequencies

We do not have frequencies listed specifically for Munnsville in Madison County, New York yet. Countywide channels for Madison County that may also cover this area are shown below when we have them. The closest trunked radio site we have is NYS Fairgrounds (Metro-25/MTA MRRS), about 33 miles away.

About Munnsville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Munnsville: Madison County Fire 460.0625 MHz, narrow FM, CSQ.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Madison County channels that also cover Munnsville

Fire Dispatch

Fire Dispatch frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County FireFire/EMS Alerting (Simulcast of TG 7477 Fire Dispatch)460.0625CSQFMNWQLN443

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County FireMadison County Fire – Tactical Channel453.0875156.7 PLFMNWQOH963
Madison County FireMadison County Fire – Tactical Channel453.9125156.7 PLFMNWQOH963
Madison County FireMadison County Fire – Tactical Channel453.9375156.7 PLFMNWQOH963
Madison County FireFire Police458.9875156.7 PLFMNWQOH963

EMS Tactical

EMS Tactical frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County EMSEMS Operations (Simulcast of TG 7301 Operations 1)453.1625CSQFMNWQLN443

Nearest trunked radio sites

Distances are measured from the center of Munnsville.

NYS Fairgrounds · Metro-25/MTA MRRS
RFSS 22 · Site 22 (hex 16) · NAC 904 · about 33 mi away
Control 773.96875, 774.21875, 774.46875, 774.91875
Simulcast · Cortland County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 4e1 · about 35 mi away
Control 454.05, 454.075, 454.225
Voice 454.275, 454.4, 454.5, 454.625
Simulcast · Tompkins County Public Safety
RFSS 1 · Site 2 (hex 2) · NAC 1E0 · about 58 mi away
Control 856.6875, 857.6875, 858.6875, 859.8875
Voice 854.0125, 854.3125, 854.4875, 854.9375, 855.0125, 855.3125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Munnsville?

We do not have a fire dispatch channel listed specifically for Munnsville. The county-level fire dispatch channels in the same county: Madison County Fire 460.0625 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Munnsville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Munnsville?

For Munnsville, start with the NYS Fairgrounds site of Metro-25/MTA MRRS. Its control channels are 773.96875, 774.21875, 774.46875, 774.91875 MHz. Program a control channel first; the scanner finds the voice channels from it.