About Holley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Holley: Orleans County Fire 46.0800 MHz, FM, no tone. Trunked: Genesee/Orleans Counties, for example Orleans County Fire/EMS talkgroup 5090 (hex 13e2).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Genesee/Orleans Counties: 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Holley, start with the Monroe West Simulcast site of Monroe/Ontario Counties, about 9 miles away. Its control channels: 851.1125, 851.1625, 851.35 MHz.
Data updated .
Orleans County channels that also cover Holley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Orleans County Fire | Fire/EMS Paging | 46.0800 | FM | KED513 | |
| Orleans County Fire | Fire/EMS Paging | 151.0850 | 156.7 PL | FMN | KFD88 |
Genesee/Orleans Counties
System ID 229
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Orleans County Fire/EMS | Orleans County Fire/EMS – Dispatch | 5090 | 13e2 | D |
| Orleans County Fire/EMS | East Response | 4002 | fa2 | D |
| Orleans County Fire/EMS | East Command | 4003 | fa3 | D |
| Orleans County Fire/EMS | East Operations | 4004 | fa4 | D |
| Orleans County Fire/EMS | Center Response | 4007 | fa7 | D |
| Orleans County Fire/EMS | Center Command | 4008 | fa8 | D |
| Orleans County Fire/EMS | Center Operations | 4009 | fa9 | D |
| Orleans County Fire/EMS | West Response | 4012 | fac | D |
| Orleans County Fire/EMS | West Command | 4013 | fad | D |
| Orleans County Fire/EMS | West Operations | 4014 | fae | D |
| Orleans County Fire/EMS | Extra Response | 4017 | fb1 | D |
| Orleans County Fire/EMS | Extra Command | 4018 | fb2 | D |
| Orleans County Fire/EMS | Extra Operations | 4019 | fb3 | D |
| Orleans County Fire/EMS | NYMED175 Patch | 5075 | 13d3 | D |
Nearest trunked radio sites
Distances are measured from the center of Holley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Holley?
We do not have a fire dispatch channel listed specifically for Holley. The county-level fire dispatch channels in the same county: Orleans County Fire 46.0800 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Holley?
Yes. The county-level systems that cover Holley are Fire and EMS talkgroups are listed for Genesee/Orleans Counties: 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Holley?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Holley?
For Holley, start with the Monroe West Simulcast site of Monroe/Ontario Counties. Its control channels are 851.1125, 851.1625, 851.35, 851.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.