Skip to content

Interlaken Fire and EMS Frequencies

We do not have frequencies listed specifically for Interlaken in Seneca County, New York yet. Countywide channels for Seneca County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Tompkins County Public Safety), about 17 miles away.

About Interlaken Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Interlaken: Seneca County Fire 460.1000 MHz, narrow FM, 114.8 PL.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Seneca County channels that also cover Interlaken

Fire Dispatch

Fire Dispatch frequencies for Seneca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seneca County FireFire/EMS Dispatch460.1000
In 465.1000
114.8 PLFMNWQVK598

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Seneca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire 3 - FiregroundFire 3 – Fireground – Fire Ground453.3875173.8 PLFMNWQVL544
Fire 4 - FiregroundFire 4 – Fireground – Fire Ground453.6625173.8 PLFMNKNIS940
Fire 5 - Fireground/Landing ZoneFire 5 – Fireground/Landing Zone – Fire Ground /Landing Zone453.9625173.8 PLFMNWQVL544
Seneca County FireSeneca County Fire – South Command453.6000
In 458.6000
173.8 PLFMNWQVK598
Seneca County FireSeneca County Fire – North Command453.6500
In 458.6500
173.8 PLFMNWQVK598
Seneca County FireSeneca County Fire – FAST/RIT460.5625173.8 PLFMNWPMM240
Seneca County FireSeneca County Fire – HazMat465.5625173.8 PLFMNWQVL544

Fire Talk-around

Fire Talk-around frequencies for Seneca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire 6 - Fire PoliceFire 6 – Fire Police – Fire Police465.6000173.8 PLFMNWPMW785

Nearest trunked radio sites

Distances are measured from the center of Interlaken.

Simulcast · Tompkins County Public Safety
RFSS 1 · Site 2 (hex 2) · NAC 1E0 · about 17 mi away
Control 856.6875, 857.6875, 858.6875, 859.8875
Voice 854.0125, 854.3125, 854.4875, 854.9375, 855.0125, 855.3125
Ontario North Simulcast · Monroe/Ontario Counties
RFSS 70 · Site 70 (hex 46) · NAC 47F · about 33 mi away
Control 769.28125, 769.55625, 769.85625, 770.10625, 773.70625, 773.90625, 774.15625, 774.40625
Simulcast · Cortland County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 4e1 · about 34 mi away
Control 454.05, 454.075, 454.225
Voice 454.275, 454.4, 454.5, 454.625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Interlaken?

We do not have a fire dispatch channel listed specifically for Interlaken. The county-level fire dispatch channels in the same county: Seneca County Fire 460.1000 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Interlaken?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Interlaken?

For Interlaken, start with the Simulcast site of Tompkins County Public Safety. Its control channels are 856.6875, 857.6875, 858.6875, 859.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.