Skip to content

Richville Fire and EMS Frequencies

We do not have frequencies listed specifically for Richville in St. Lawrence County, New York yet. Countywide channels for St. Lawrence County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Lewis County), about 41 miles away.

About Richville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Richville: Fire and EMS 154.3550 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Richville: SUNY Potsdam EMS 154.5150 MHz, narrow FM, 100.0 PL.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

St. Lawrence County channels that also cover Richville

Fire Dispatch

Fire Dispatch frequencies for St. Lawrence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSFire/EMS Dispatch154.3550
In 151.3550
179.9 PLFMNWNKG573

Fire Ground / Tactical

Fire Ground / Tactical frequencies for St. Lawrence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSFire/EMS Channel 2 Fireground154.2500156.7 PLFMNKEL401
Fire and EMSFire/EMS Channel 3 Fireground154.2650156.7 PLFMNKEL401
North Lawrence FireNorth Lawrence Fire – Fire Ground154.3850100.0 PLFMNWPKS476
Services FireCounty HazMat Team154.7700192.8 PLFMNWRAW398

EMS Dispatch

EMS Dispatch frequencies for St. Lawrence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
SUNY Potsdam EMSCampus Rescue Squad (CRS)154.5150
In 159.6300
100.0 PLFMNWPGY348

EMS Tactical

EMS Tactical frequencies for St. Lawrence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSEMS Operations155.3400CSQFMNKD48009

EMS Talk-around

EMS Talk-around frequencies for St. Lawrence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSTritown Rescue Squad155.2650
In 158.7600
71.9 PLFMNWQLL437
Fire and EMSTritown Rescue Squad – Secondary158.940071.9 PLFMNWQLL437

Nearest trunked radio sites

Distances are measured from the center of Richville.

Simulcast · Lewis County
RFSS 1 · Site 1 (hex 1) · NAC 70D · about 41 mi away
Control 453.15, 453.2625, 453.3125, 453.3625, 453.55
Simulcast · Clinton County
RFSS 1 · Site 1 (hex 1) · NAC 9D1 · about 87 mi away
Control 852.3625, 852.5625, 852.8125, 853.0625
Voice 851.8875, 852.1625
NYS Fairgrounds · Metro-25/MTA MRRS
RFSS 22 · Site 22 (hex 16) · NAC 904 · about 101 mi away
Control 773.96875, 774.21875, 774.46875, 774.91875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Richville?

We do not have a fire dispatch channel listed specifically for Richville. The county-level fire dispatch channels in the same county: Fire and EMS 154.3550 MHz, narrow FM, 179.9 PL.

What frequency does EMS or the ambulance service use in Richville?

We do not have a EMS dispatch channel listed specifically for Richville. The county-level EMS dispatch channels in the same county: SUNY Potsdam EMS 154.5150 MHz, narrow FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Richville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Richville?

For Richville, start with the Simulcast site of Lewis County. Its control channels are 453.15, 453.2625, 453.3125, 453.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.