Skip to content

Waverly Fire and EMS Frequencies

We do not have frequencies listed specifically for Waverly in Tioga County, New York yet. Countywide channels for Tioga County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Tompkins County Public Safety), about 30 miles away.

About Waverly Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Waverly: Tioga County Fire 46.2000 MHz, FM, 100.0 PL.

  • 16 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Tioga County channels that also cover Waverly

Fire Dispatch

Fire Dispatch frequencies for Tioga County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tioga County FireChannel 1 Dispatch46.2000100.0 PLFMKBQ394
Tioga County FireTioga County Fire – Dispatch (46.20 rebroadcast)453.3500107.2 PLFMNWPVS328

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Tioga County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire VHF 1County Fire VHF154.1000FMNWQAA540
County Fire VHF 2County Fire VHF154.1450FMNWQAA540
County Fire VHF 3County Fire VHF154.2950FMNWQAA540
Fire Ch. 3 Fire PoliceChannel 3 Fire Police46.2800100.0 PLFMKED611
Fire Ch. 4 FiregroundChannel 4 Fireground46.3200100.0 PLFMKED611
Fire Ch. 5 FiregroundChannel 5 Fireground46.2600100.0 PLFMKED611
Fire Ch. 6 FiregroundChannel 6 Fireground46.4200100.0 PLFMKED611
Tioga County FireChannel 2 Mutual Aid46.2200100.0 PLFMKED611
Tioga County FireFireground Command453.0375
In 458.0375
FMNWPVS255
Tioga County FireFireground Command453.0875
In 458.0875
FMNWPVS255
Tioga County FireFireground Command453.1125
In 458.1125
FMNWPVS255
Tioga County FireFireground Command453.8875
In 458.8875
FMNWPVS255
Waverly-Barton FireWaverly-Barton Tactical156.0675FMNWQFV617
Waverly-Barton FireWaverly-Barton Tactical159.0075FMNWQFV617

Nearest trunked radio sites

Distances are measured from the center of Waverly.

Simulcast · Tompkins County Public Safety
RFSS 1 · Site 2 (hex 2) · NAC 1E0 · about 30 mi away
Control 856.6875, 857.6875, 858.6875, 859.8875
Voice 854.0125, 854.3125, 854.4875, 854.9375, 855.0125, 855.3125
Simulcast · Cortland County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 4e1 · about 47 mi away
Control 454.05, 454.075, 454.225
Voice 454.275, 454.4, 454.5, 454.625
Ontario South Simulcast · Monroe/Ontario Counties
RFSS 80 · Site 80 (hex 50) · NAC 47F · about 66 mi away
Control 769.25625, 769.78125, 770.08125, 773.93125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Waverly?

We do not have a fire dispatch channel listed specifically for Waverly. The county-level fire dispatch channels in the same county: Tioga County Fire 46.2000 MHz, FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Waverly?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Waverly?

For Waverly, start with the Simulcast site of Tompkins County Public Safety. Its control channels are 856.6875, 857.6875, 858.6875, 859.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.