Skip to content

North Rose Fire and EMS Frequencies

We do not have frequencies listed specifically for North Rose in Wayne County, New York yet. Countywide channels for Wayne County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ontario North Simulcast (Monroe/Ontario Counties), about 27 miles away.

About North Rose Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers North Rose: Ch 1 Fire Dispatch 151.3775 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers North Rose: Ch 2 EMS Dispatch 155.9400 MHz, narrow FM, 156.7 PL.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Wayne County channels that also cover North Rose

Fire Dispatch

Fire Dispatch frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ch 1 Fire DispatchCh Fire Dispatch151.3775
In 159.0525
141.3 PLFMNWQLQ220

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ch 3 FiregroundCh Fireground156.1725071 DPLFMNWQLQ220
Ch 4 FiregroundCh Fireground151.0025115 DPLFMNWQLQ220
Wayne County FireCh Tanker Relays155.8500FMNWQLQ220

Fire Talk-around

Fire Talk-around frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wayne County FireWayne County Fire – Alternate151.0925172 DPLFMNWQLQ220
Wayne County FireWayne County Fire – Alternate153.8525343 DPLFMNWQLQ220
Wayne County FireCh Training153.8675627 DPLFMNWQLQ220

EMS Dispatch

EMS Dispatch frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ch 2 EMS DispatchCh EMS Dispatch155.9400
In 151.1675
156.7 PLFMNKZV227

Nearest trunked radio sites

Distances are measured from the center of North Rose.

Ontario North Simulcast · Monroe/Ontario Counties
RFSS 70 · Site 70 (hex 46) · NAC 47F · about 27 mi away
Control 769.28125, 769.55625, 769.85625, 770.10625, 773.70625, 773.90625, 774.15625, 774.40625
NYS Fairgrounds · Metro-25/MTA MRRS
RFSS 22 · Site 22 (hex 16) · NAC 904 · about 34 mi away
Control 773.96875, 774.21875, 774.46875, 774.91875
Monroe South Simulcast · Monroe/Ontario Counties
RFSS 64 · Site 64 (hex 40) · NAC 47F · about 39 mi away
Control 769.36875, 769.58125, 769.80625, 770.00625, 770.25625, 773.88125, 774.38125, 774.66875, 774.88125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in North Rose?

We do not have a fire dispatch channel listed specifically for North Rose. The county-level fire dispatch channels in the same county: Ch 1 Fire Dispatch 151.3775 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in North Rose?

We do not have a EMS dispatch channel listed specifically for North Rose. The county-level EMS dispatch channels in the same county: Ch 2 EMS Dispatch 155.9400 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in North Rose?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in North Rose?

For North Rose, start with the Ontario North Simulcast site of Monroe/Ontario Counties. Its control channels are 769.28125, 769.55625, 769.85625, 770.10625 MHz. Program a control channel first; the scanner finds the voice channels from it.