Skip to content

Grandfather Village Fire and EMS Frequencies

We do not have frequencies listed specifically for Grandfather Village in Avery County, North Carolina yet. Countywide channels for Avery County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Linville (North Carolina VIPER), about 2 miles away.

About Grandfather Village Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grandfather Village: Avery County Fire 154.4450 MHz, narrow FM, 110.9 PL. County-level ems dispatch that covers Grandfather Village: Avery County EMS 155.2800 MHz, narrow FM, 118.8 PL. Trunked: North Carolina VIPER, for example Avery County Fire talkgroup 4702 (hex 125e).

  • 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grandfather Village, start with the Linville site of North Carolina VIPER, about 2 miles away. Its control channels: 774.16875, 774.70625 MHz.

Data updated .

Avery County channels that also cover Grandfather Village

Fire Dispatch

Fire Dispatch frequencies for Avery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Avery County FireAvery County Fire – Dispatch154.4450
In 154.0100
110.9 PLFMNKNGE474

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Avery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Avery County FireAvery County Fire – Tactical Channel154.2500110.9 PLFMNKNGE474
Avery County FireAvery County Fire – Tactical Channel159.9300
In 153.5900
FMNWPNV228
Colletsville FireColletsville Fire154.1900
In 160.0950
FMNWNHT332

EMS Dispatch

EMS Dispatch frequencies for Avery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Avery County EMSEMS/Rescue Dispatch155.2800118.8 PLFMNKNIF505

EMS Tactical

EMS Tactical frequencies for Avery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Avery and Linville RescueAvery and Linville Rescue155.2800118.8 PLFMNKNIF505
Avery County EMSEMS/Rescue Tactical155.2950118.8 PLFMNWPQI536
Avery County EMSMedics155.6475110.9 PLFMNWQAY920
Avery County EMSMED463.0250
In 468.0250
110.9 PLFMNWNRC892
Avery County EMSMED463.0500
In 468.0500
110.9 PLFMNWNRC892

Hospitals & Medical

Hospitals & Medical frequencies for Avery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Avery County HospitalCannon Hospital155.3400118.8 PLFMNKNIF505
Avery County HospitalSloop Hospital155.3400118.8 PLFMNKNIF505

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Avery County FireAvery County Fire – Dispatch4702125eD
Avery County FireAvery Fire Tactical47061262D
Avery County FireAvery Fire Tactical47071263D
Avery County FireAvery Fire Tactical47081264D
Avery County FireAvery Fire Tactical47091265D
Avery County FireAvery Fire Tactical47101266D
Avery County FireAvery Fire Tactical47111267D
Avery County FireAvery Fire Tactical47121268D
Avery County EMSAvery County EMS – Dispatch4701125dD

Nearest trunked radio sites

Distances are measured from the center of Grandfather Village.

Linville · North Carolina VIPER
RFSS 2 · Site 56 (hex 38) · NAC 1F0 · about 2 mi away
Control 774.16875, 774.70625
Voice 770.55625, 771.13125, 771.53125, 772.23125, 772.74375, 772.90625
Hawshaw #241 · North Carolina VIPER
RFSS 2 · Site 68 (hex 44) · NAC 1F0 · about 6 mi away
Control 773.93125, 774.21875
Voice 771.04375, 771.54375, 772.66875, 773.18125
Beech Mtn · North Carolina VIPER
RFSS 2 · Site 7 (hex 7) · NAC 1F0 · about 7 mi away
Control 852.9125, 853.875
Voice 851.2625, 851.8125, 852.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grandfather Village?

We do not have a fire dispatch channel listed specifically for Grandfather Village. The county-level fire dispatch channels in the same county: Avery County Fire 154.4450 MHz, narrow FM, 110.9 PL.

What frequency does EMS or the ambulance service use in Grandfather Village?

We do not have a EMS dispatch channel listed specifically for Grandfather Village. The county-level EMS dispatch channels in the same county: Avery County EMS 155.2800 MHz, narrow FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Grandfather Village?

Yes. The county-level systems that cover Grandfather Village are Fire and EMS talkgroups are listed for North Carolina VIPER: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Grandfather Village?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Grandfather Village?

For Grandfather Village, start with the Linville site of North Carolina VIPER. Its control channels are 774.16875, 774.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.