About Brandywine Bay Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Brandywine Bay: Carteret County Fire/Ems Dispatch 154.9950 MHz, narrow FM, 179.9 PL. Trunked: North Carolina VIPER, for example Carteret County Fire talkgroup 8515 (hex 2143).
- 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Brandywine Bay, start with the Newport site of North Carolina VIPER, about 2 miles away. Its control channels: 852.8375, 853.3375 MHz.
Data updated .
Carteret County channels that also cover Brandywine Bay
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carteret County Fire/Ems Dispatch | Carteret County Fire/Ems Dispatch | 154.9950 In 158.9550 | 179.9 PL | FMN | WQDK653 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carteret County Fire | Countywide Emergency Repeater | 153.9950 In 158.7750 | 77.0 PL | FMN | — |
| Carteret County Fire | MHC/AB/PKS Are Tactical Fire | 154.0700 | 97.4 PL | FMN | — |
| Carteret County Fire | Down East (East Half) Tactical Fire | 154.3250 | 127.3 PL | FMN | — |
| Carteret County Fire | County Wide Training/MISC Administration | 155.2200 | 97.4 PL | FMN | — |
| Carteret County Fire | Down East (West Half) Tactical Fire | 155.6250 | 97.4 PL | FMN | — |
| County Wide Tactical Fire | County Wide Tactical Fire | 153.9500 | 97.4 PL | FMN | — |
| Davis Volunteer Fire Dept | Davis Volunteer Fire Department | 154.3250 In 151.3925 | 127.3 PL | FMN | WQGT944 |
| Newport Area Tactical Fire | Newport Area Tactical Fire | 154.1450 | 97.4 PL | FMN | — |
| Western Area Tactical Fire | Western Area Tactical Fire | 151.1150 | 97.4 PL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hospital | Carteret General Hospital | 155.3400 | 179.9 PL | FMN | WQM658 |
| Hospital | Carolina East Hospital | 155.3400 | 162.2 PL | FMN | — |
| Hospital | Hospital POCSAG Paging | 158.7000 | FMN | KWU435 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Carteret County Fire | Carteret County Fire – Dispatch | 8515 | 2143 | D |
| Carteret County Fire | MoreHead Fire | 8528 | 2150 | D |
| Carteret County EMS | Carteret County EMS – Dispatch | 8516 | 2144 | D |
| Carteret County EMS | EMS Administration | 8517 | 2145 | D |
Nearest trunked radio sites
Distances are measured from the center of Brandywine Bay.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brandywine Bay?
We do not have a fire dispatch channel listed specifically for Brandywine Bay. The county-level fire dispatch channels in the same county: Carteret County Fire/Ems Dispatch 154.9950 MHz, narrow FM, 179.9 PL.
Do fire departments and EMS use a trunked radio system in Brandywine Bay?
Yes. The county-level systems that cover Brandywine Bay are Fire and EMS talkgroups are listed for North Carolina VIPER: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Brandywine Bay?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Brandywine Bay?
For Brandywine Bay, start with the Newport site of North Carolina VIPER. Its control channels are 852.8375, 853.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.