About Arrowhead Beach Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Arrowhead Beach: Chowan County Fire 154.2200 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Arrowhead Beach: Chowan County EMS 155.7450 MHz, narrow FM, 146.2 PL. Trunked: North Carolina VIPER, for example Chowan County Fire talkgroup 11006 (hex 2afe).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Arrowhead Beach, start with the Valhalla site of North Carolina VIPER, about 7 miles away. Its control channels: 852.3625, 853.75 MHz.
Data updated .
Chowan County channels that also cover Arrowhead Beach
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chowan County Fire | Chowan County Fire – Dispatch | 154.2200 In 153.7700 | 146.2 PL | FMN | KSZ729 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chowan County EMS | Chowan County EMS – Dispatch (patched to VIPER TG) | 155.7450 In 153.8750 | 146.2 PL | FMN | KTH465 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Chowan County Fire | Chowan County Fire – Dispatch | 11006 | 2afe | T |
| Chowan County Fire | Fire Administration | 11005 | 2afd | T |
| Chowan County EMS | Chowan County EMS – Dispatch | 11003 | 2afb | T |
| Chowan County EMS | EMS Administration | 11004 | 2afc | T |
Nearest trunked radio sites
Distances are measured from the center of Arrowhead Beach.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Arrowhead Beach?
We do not have a fire dispatch channel listed specifically for Arrowhead Beach. The county-level fire dispatch channels in the same county: Chowan County Fire 154.2200 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Arrowhead Beach?
We do not have a EMS dispatch channel listed specifically for Arrowhead Beach. The county-level EMS dispatch channels in the same county: Chowan County EMS 155.7450 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Arrowhead Beach?
Yes. The county-level systems that cover Arrowhead Beach are Fire and EMS talkgroups are listed for North Carolina VIPER: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Arrowhead Beach?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Arrowhead Beach?
For Arrowhead Beach, start with the Valhalla site of North Carolina VIPER. Its control channels are 852.3625, 853.75 MHz. Program a control channel first; the scanner finds the voice channels from it.