Skip to content

Crouse Fire and EMS Frequencies

We do not have frequencies listed specifically for Crouse in Lincoln County, North Carolina yet. Countywide channels for Lincoln County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lincolnton (North Carolina VIPER), about 6 miles away.

About Crouse Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Crouse: Lincoln County Fire 159.1650 MHz, narrow FM, 218.1 PL. County-level ems dispatch that covers Crouse: Lincoln County EMS 154.8150 MHz, narrow FM, 107.2 PL. Trunked: North Carolina VIPER, for example Lincoln County Fire talkgroup 28002 (hex 6d62).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crouse, start with the Lincolnton site of North Carolina VIPER, about 6 miles away. Its control channels: 774.45625, 774.89375 MHz.

Data updated .

Lincoln County channels that also cover Crouse

Fire Dispatch

Fire Dispatch frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County FireLincoln County Fire – Dispatch159.1650
In 150.9950
218.1 PLFMNWPKN711

EMS Dispatch

EMS Dispatch frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County EMSLincoln County EMS – Dispatch154.8150
In 158.9850
107.2 PLFMNWPLW620

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Lincoln County FireLincoln Fire280026d62D
Lincoln County FireLincoln Tactical280176d71D
Lincoln County FireLincoln Tactical280186d72D
Lincoln County FireLincoln Tactical280196d73D
Lincoln County FireLincoln Tactical280206d74D
Lincoln County FireLincoln Tactical280216d75D
Lincoln County FireLincoln Tactical280236d77D
Lincoln County FireLincoln Tactical280246d78D
Lincoln County FireLincoln Tactical280256d79D
Lincoln County FireLincoln Tactical280276d7bD
Lincoln County FireLincoln Tactical280326d80D
Lincoln County FireLincoln Tactical280376d85D
Lincoln County EMSLincoln EMS280016d61D

Nearest trunked radio sites

Distances are measured from the center of Crouse.

Lincolnton · North Carolina VIPER
RFSS 2 · Site 95 (hex 5F) · NAC 1F0 · about 6 mi away
Control 774.45625, 774.89375
Voice 769.53125, 770.03125, 771.10625, 771.38125, 772.35625, 772.60625, 773.21875, 774.18125
Gastonia Simulcast · Charlotte UASI
RFSS 1 · Site 10 (hex A) · NAC 2DA · about 11 mi away
Control 851.7375, 852.65, 852.875, 853.4625
Voice 851.3375, 854.0875, 856.6875, 858.0625
Gaston Simulcast · North Carolina VIPER
RFSS 2 · Site 53 (hex 35) · NAC 1F3 · about 13 mi away
Control 772.93125, 773.98125, 853.375, 853.95
Voice 770.29375, 770.86875, 771.15625, 771.90625, 851.725, 852.1, 852.6, 853.1375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Crouse?

We do not have a fire dispatch channel listed specifically for Crouse. The county-level fire dispatch channels in the same county: Lincoln County Fire 159.1650 MHz, narrow FM, 218.1 PL.

What frequency does EMS or the ambulance service use in Crouse?

We do not have a EMS dispatch channel listed specifically for Crouse. The county-level EMS dispatch channels in the same county: Lincoln County EMS 154.8150 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Crouse?

Yes. The county-level systems that cover Crouse are Fire and EMS talkgroups are listed for North Carolina VIPER: 13 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Crouse?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Crouse?

For Crouse, start with the Lincolnton site of North Carolina VIPER. Its control channels are 774.45625, 774.89375 MHz. Program a control channel first; the scanner finds the voice channels from it.