About Parmele Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Parmele: Martin County Fire 150.9950 MHz, FM, 192.8 PL. County-level ems dispatch that covers Parmele: Martin County EMS 155.2200 MHz, FM, 192.8 PL. Trunked: North Carolina VIPER, for example Martin County Fire talkgroup 30003 (hex 7533).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Parmele, start with the Williamston site of North Carolina VIPER, about 12 miles away. Its control channels: 859.9875, 860.4875 MHz.
Data updated .
Martin County channels that also cover Parmele
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County Fire | Martin County Fire Dispatch | 150.9950 In 159.0450 | 192.8 PL | FM | WPZI489 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County Fire | Martin County Fire Tactical 1 | 154.0100 | 192.8 PL | FM | WPZI489 |
| Martin County Fire | Martin County Fire Tact2 | 154.1750 | 192.8 PL | FM | WPZI489 |
| Martin County Fire | Martin County Fire Tact3 | 154.3700 | 192.8 PL | FM | WPZI489 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County EMS | Marrtin County Ems Dispatch | 155.2200 | 192.8 PL | FM | KNCY662 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County EMS | Martin County State Rescue | 155.2800 | 192.8 PL | FM | KNCY662 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Martin County Fire | Martin County Fire – Dispatch | 30003 | 7533 | D |
| Martin County Fire | County Tactical 3 Fire | 30013 | 753d | D |
| Martin County EMS | Martin County EMS – Dispatch | 30002 | 7532 | D |
Nearest trunked radio sites
Distances are measured from the center of Parmele.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Parmele?
We do not have a fire dispatch channel listed specifically for Parmele. The county-level fire dispatch channels in the same county: Martin County Fire 150.9950 MHz, FM, 192.8 PL.
What frequency does EMS or the ambulance service use in Parmele?
We do not have a EMS dispatch channel listed specifically for Parmele. The county-level EMS dispatch channels in the same county: Martin County EMS 155.2200 MHz, FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Parmele?
Yes. The county-level systems that cover Parmele are Fire and EMS talkgroups are listed for North Carolina VIPER: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Parmele?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Parmele?
For Parmele, start with the Williamston site of North Carolina VIPER. Its control channels are 859.9875, 860.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.