Skip to content

Roberdel Fire and EMS Frequencies

We do not have frequencies listed specifically for Roberdel in Richmond County, North Carolina yet. Countywide channels for Richmond County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rockingham DOT (North Carolina VIPER), about 3 miles away.

About Roberdel Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Roberdel: Richmond County Fire 453.4875 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Roberdel: Richmond County EMS 158.8950 MHz, narrow FM, 136.5 PL. Trunked: North Carolina VIPER, for example Richmond County Fire talkgroup 39006 (hex 985e).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Roberdel, start with the Rockingham DOT site of North Carolina VIPER, about 3 miles away. Its control channels: 773.70625, 774.13125 MHz.

Data updated .

Richmond County channels that also cover Roberdel

Fire Dispatch

Fire Dispatch frequencies for Richmond County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richmond County FireFire Operations453.4875
In 458.4875
146.2 PLFMNWQCE948

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Richmond County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richmond County FireFire Operations453.3125
In 458.3125
146.2 PLFMNWQCE948
Richmond County FireFire Operations453.6375
In 458.6375
146.2 PLFMNWQJF521
Richmond County FireFire Operations460.6375
In 465.6375
146.2 PLFMNWQDV206

Fire Talk-around

Fire Talk-around frequencies for Richmond County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Northside FD FireNorthside Fire Department453.1750
In 458.1750
110.9 PLFMNWQL904

EMS Dispatch

EMS Dispatch frequencies for Richmond County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richmond County EMSEMS/Rescue Dispatch158.8950
In 153.9050
136.5 PLFMNWPPG758

EMS Tactical

EMS Tactical frequencies for Richmond County
AgencyDescriptionFrequency (MHz)ToneModeFCC
State RescueState Rescue155.2800110.9 PLFMNKVM203

Hospitals & Medical

Hospitals & Medical frequencies for Richmond County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richmond County HospitalEMS/Hospital ER155.3400110.9 PLFMNKVM203

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Richmond County FireRichmond County Fire – Dispatch39006985eD
Richmond County FireFire Administration39003985bD
Richmond County EMSRichmond County EMS – Dispatch39005985dD
Richmond County EMSEMS Administration390019859D

Nearest trunked radio sites

Distances are measured from the center of Roberdel.

Rockingham DOT · North Carolina VIPER
RFSS 4 · Site 34 (hex 22) · NAC 1F0 · about 3 mi away
Control 773.70625, 774.13125
Voice 770.40625, 771.44375, 771.79375, 772.09375, 772.79375
Hamlet · North Carolina VIPER
RFSS 4 · Site 22 (hex 16) · NAC 1F1 · about 8 mi away
Control 852.6625, 853.7375
Voice 851.15, 851.4375, 852.275, 854.0875
Ellerbe · North Carolina VIPER
RFSS 4 · Site 15 (hex F) · NAC 1F1 · about 10 mi away
Control 852.575, 853.6875
Voice 851.375, 851.7125, 852.075, 857.9375, 858.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Roberdel?

We do not have a fire dispatch channel listed specifically for Roberdel. The county-level fire dispatch channels in the same county: Richmond County Fire 453.4875 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Roberdel?

We do not have a EMS dispatch channel listed specifically for Roberdel. The county-level EMS dispatch channels in the same county: Richmond County EMS 158.8950 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Roberdel?

Yes. The county-level systems that cover Roberdel are Fire and EMS talkgroups are listed for North Carolina VIPER: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Roberdel?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Roberdel?

For Roberdel, start with the Rockingham DOT site of North Carolina VIPER. Its control channels are 773.70625, 774.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.