Skip to content

Chimney Rock Village Fire and EMS Frequencies

We do not have frequencies listed specifically for Chimney Rock Village in Rutherford County, North Carolina yet. Countywide channels for Rutherford County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Chimney Rock (North Carolina VIPER), about 2 miles away.

About Chimney Rock Village Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Chimney Rock Village: Rutherford County Fire 159.1950 MHz, FM, 77.0 PL. County-level ems dispatch that covers Chimney Rock Village: Rutherford County EMS 155.0550 MHz, FM, 162.2 PL. Trunked: North Carolina VIPER, for example Rutherford County Fire talkgroup 41002 (hex a02a).

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Chimney Rock Village, start with the Chimney Rock site of North Carolina VIPER, about 2 miles away. Its control channels: 770.75625, 771.58125 MHz.

Data updated .

Rutherford County channels that also cover Chimney Rock Village

Fire Dispatch

Fire Dispatch frequencies for Rutherford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rutherford County FireRutherford County Fire – Dispatch159.195077.0 PLFMKNJX302

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rutherford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cherry Mountain Volunteer Fire DepartmentCherry Mountain Volunteer Fire Department154.1750FMKVG805
Cherry Mountain Volunteer Fire DepartmentCherry Mountain Volunteer Fire Department159.1725
In 155.7975
FMWPXC768
Hudlow Volunteer Fire DepartmentHudlow Volunteer Fire Department151.0550
In 154.2050
FMWQGQ533
Rutherford County FireRutherford County Fire – Tactical Channel154.2050FMKRR977

EMS Dispatch

EMS Dispatch frequencies for Rutherford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rutherford County EMSRutherford County EMS – Dispatch155.0550162.2 PLFM—

EMS Tactical

EMS Tactical frequencies for Rutherford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rutherford County EMSRutherford County EMS – Tactical Channel155.2200FMKQO786
Rutherford County EMSRutherford County EMS – Tactical Channel155.2800FMKQO786

Hospitals & Medical

Hospitals & Medical frequencies for Rutherford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rutherford County HospitalEMS to Hospital155.3400162.2 PLFMKQO786

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Rutherford County FireRutherford County Fire – Dispatch41002a02aD
Rutherford County FireRutherford County Fire – Tactical Channel41010a032D
Rutherford County FireRutherford County Fire – Tactical Channel41011a033D
Rutherford County FireRutherford County Fire – Tactical Channel41012a034D
Rutherford County FireRutherford County Fire – Tactical Channel41022a03eD
Rutherford County FireRutherford County Fire – Tactical Channel41023a03fD
Rutherford County FireRutherford County Fire – Tactical Channel41024a040D
Rutherford County EMSRutherford County EMS – Dispatch41001a029D

Nearest trunked radio sites

Distances are measured from the center of Chimney Rock Village.

Chimney Rock · North Carolina VIPER
RFSS 2 · Site 23 (hex 17) · NAC 1F0 · about 2 mi away
Control 770.75625, 771.58125
Voice 769.50625, 769.84375, 770.51875, 772.58125, 773.65625
Sugarloaf Mtn · Henderson County
Site 3 (hex 3) · about 5 mi away
Control 153.4625
Voice 151.9775, 153.4925, 153.6875, 154.61
Bearwallow Mtn · North Carolina VIPER
RFSS 2 · Site 6 (hex 6) · NAC 1F0 · about 6 mi away
Control 772.96875, 773.71875
Voice 769.35625, 771.30625, 771.80625, 772.38125, 772.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Chimney Rock Village?

We do not have a fire dispatch channel listed specifically for Chimney Rock Village. The county-level fire dispatch channels in the same county: Rutherford County Fire 159.1950 MHz, FM, 77.0 PL.

What frequency does EMS or the ambulance service use in Chimney Rock Village?

We do not have a EMS dispatch channel listed specifically for Chimney Rock Village. The county-level EMS dispatch channels in the same county: Rutherford County EMS 155.0550 MHz, FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Chimney Rock Village?

Yes. The county-level systems that cover Chimney Rock Village are Fire and EMS talkgroups are listed for North Carolina VIPER: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Chimney Rock Village?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Chimney Rock Village?

For Chimney Rock Village, start with the Chimney Rock site of North Carolina VIPER. Its control channels are 770.75625, 771.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.