Skip to content

Hastings Fire and EMS Frequencies

We do not have frequencies listed specifically for Hastings in Bottineau County, North Dakota yet. Countywide channels for Bottineau County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Maxbass (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 7 miles away.

About Hastings Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Hastings: Bottineau County EMS 158.8800 MHz, narrow FM, 88.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Bottineau County channels that also cover Hastings

EMS Dispatch

EMS Dispatch frequencies for Bottineau County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bottineau County EMSSheriff's / EMS Dispatch / Renville Sheriff's Office Dispatch158.8800
In 153.8450
88.5 PLFMNWPFK637
Bottineau County EMSSheriff's / EMS Dispatch / Renville Sheriff's Office Dispatch158.8800
In 153.8450
NAC 312P25WPFK637

EMS Tactical

EMS Tactical frequencies for Bottineau County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bottineau County EMSBottineau Ambulance Service155.2800FMNKC6013
Bottineau County EMSBottineau Ambulance Service155.3400FMNKC6013

Nearest trunked radio sites

Distances are measured from the center of Hastings.

Maxbass · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 66 (hex 42) · about 7 mi away
Control 852.2625
Voice 851.7625, 852.0375
Blaisdell · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 61 (hex 3D) · NAC A6C · about 7 mi away
Control 852.1375, 852.3625
Voice 851.8625
Mohall · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 30 (hex 1E) · NAC A6D · about 23 mi away
Control 852.1125, 852.3375
Voice 851.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Hastings?

We do not have a EMS dispatch channel listed specifically for Hastings. The county-level EMS dispatch channels in the same county: Bottineau County EMS 158.8800 MHz, narrow FM, 88.5 PL.

What scanner do I need to listen to fire and EMS in Hastings?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Hastings?

For Hastings, start with the Maxbass site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.