Skip to content

Harmonious Fire and EMS Frequencies

We do not have frequencies listed specifically for Harmonious in Burke County, North Dakota yet. Countywide channels for Burke County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Columbus (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 6 miles away.

About Harmonious Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Harmonious yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Harmonious.

Columbus · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 11 (hex B) · NAC A60 · about 6 mi away
Control 852.0875, 852.3125
Voice 851.8125
Crosby · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 0 · Site 213 (hex D5) · about 15 mi away
Voice 851.9375, 852.2125, 852.4375
Alamo · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 47 (hex 2F) · NAC A6E · about 23 mi away
Control 852.0375, 852.2625
Voice 851.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Harmonious?

For Harmonious, start with the Columbus site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.0875, 852.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.