Skip to content

Grand Valley Fire and EMS Frequencies

We do not have frequencies listed specifically for Grand Valley in Dickey County, North Dakota yet. Countywide channels for Dickey County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Merricourt (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 10 miles away.

About Grand Valley Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grand Valley: Dickey County Fire 155.7600 MHz, narrow FM, 123.0 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Dickey County channels that also cover Grand Valley

Fire Dispatch

Fire Dispatch frequencies for Dickey County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickey County FireSheriff's Department / Fire-EMS / Road Department / Busses155.7600
In 153.9200
123.0 PLFMNKDR780

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dickey County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickey County FireOakes Fire154.1450CSQFMNWNJZ587
Dickey County FireOakes Fire154.3475
In 158.8800
FMNWQWJ365

Nearest trunked radio sites

Distances are measured from the center of Grand Valley.

Merricourt · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 28 (hex 1C) · NAC A6B · about 10 mi away
Control 853.6375
Voice 853.1875, 853.4125
Oakes · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 67 (hex 43) · about 15 mi away
Control 853.8875
Voice 853.4375, 853.6625
Wishek · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 44 (hex 2C) · NAC A6B · about 46 mi away
Control 852.2625
Voice 851.7625, 852.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grand Valley?

We do not have a fire dispatch channel listed specifically for Grand Valley. The county-level fire dispatch channels in the same county: Dickey County Fire 155.7600 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Grand Valley?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Grand Valley?

For Grand Valley, start with the Merricourt site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.6375 MHz. Program a control channel first; the scanner finds the voice channels from it.