About Cherry Lake Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Cherry Lake: Eddy County Fire 154.0400 MHz, P25, NAC 455.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Eddy County channels that also cover Cherry Lake
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Eddy County Fire | Sheriff, Fire, EMS Dispatch | 154.0400 In 158.9250 | NAC 455 | P25 | WPJK859 |
Nearest trunked radio sites
Distances are measured from the center of Cherry Lake.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cherry Lake?
We do not have a fire dispatch channel listed specifically for Cherry Lake. The county-level fire dispatch channels in the same county: Eddy County Fire 154.0400 MHz, P25, NAC 455.
What scanner do I need to listen to fire and EMS in Cherry Lake?
A scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Cherry Lake?
For Cherry Lake, start with the Colvin site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.1625, 852.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.