Skip to content

Kunze Fire and EMS Frequencies

We do not have frequencies listed specifically for Kunze in Hettinger County, North Dakota yet. Countywide channels for Hettinger County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Gladstone (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 18 miles away.

About Kunze Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Kunze yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Kunze.

Gladstone · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 56 (hex 38) · about 18 mi away
Control 852.1125, 852.3125
Voice 851.8375
Dickinson State Tower · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 14 (hex E) · about 18 mi away
Control 852.0875, 852.3125
Voice 851.8125
Dickinson Metro Simulcast · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 5 (hex 5) · NAC A64 · about 21 mi away
Control 853.6375, 853.8625
Voice 853.1875, 853.4125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Kunze?

For Kunze, start with the Gladstone site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.1125, 852.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.