Skip to content

Graf Fire and EMS Frequencies

We do not have frequencies listed specifically for Graf in Kidder County, North Dakota yet. Countywide channels for Kidder County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tappen (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 23 miles away.

About Graf Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Graf yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Graf.

Tappen · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 53 (hex 35) · NAC A62 · about 23 mi away
Control 852.4375
Voice 851.9375, 852.2125
Cleveland · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 10 (hex A) · NAC A69 · about 27 mi away
Control 853.6875, 853.9125
Voice 853.4625
Wishek · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 44 (hex 2C) · NAC A6B · about 31 mi away
Control 852.2625
Voice 851.7625, 852.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Graf?

For Graf, start with the Tappen site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.