Skip to content

Finn Fire and EMS Frequencies

We do not have frequencies listed specifically for Finn in Logan County, North Dakota yet. Countywide channels for Logan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cleveland (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 25 miles away.

About Finn Fire and EMS Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Logan County channels that also cover Finn

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Logan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County FireGackle Fire154.1600CSQFMNWNJH853

Nearest trunked radio sites

Distances are measured from the center of Finn.

Cleveland · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 10 (hex A) · NAC A69 · about 25 mi away
Control 853.6875, 853.9125
Voice 853.4625
Ypsilanti · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 80 (hex 50) · NAC A6F · about 28 mi away
Control 852.1125, 852.3375
Voice 851.8375
Merricourt · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 28 (hex 1C) · NAC A6B · about 29 mi away
Control 853.6375
Voice 853.1875, 853.4125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Finn?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Finn?

For Finn, start with the Cleveland site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.6875, 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.