Skip to content

Mouse River Fire and EMS Frequencies

We do not have frequencies listed specifically for Mouse River in McHenry County, North Dakota yet. Countywide channels for McHenry County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Towner (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 24 miles away.

About Mouse River Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mouse River: McHenry County Fire 154.1900 MHz, narrow FM, CSQ.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

McHenry County channels that also cover Mouse River

Fire Dispatch

Fire Dispatch frequencies for McHenry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McHenry County FireVelva Fire154.1900CSQFMNKLC995

Fire Ground / Tactical

Fire Ground / Tactical frequencies for McHenry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McHenry County FireAnamoose Fire155.9400CSQFMNWNMG792

Nearest trunked radio sites

Distances are measured from the center of Mouse River.

Towner · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 89 (hex 59) · about 24 mi away
Control 853.7875
Voice 853.3375, 853.5625
Bottineau · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 85 (hex 55) · about 25 mi away
Control 853.6375, 853.8625
Voice 853.4125
Maxbass · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 66 (hex 42) · about 26 mi away
Control 852.2625
Voice 851.7625, 852.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mouse River?

We do not have a fire dispatch channel listed specifically for Mouse River. The county-level fire dispatch channels in the same county: McHenry County Fire 154.1900 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Mouse River?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Mouse River?

For Mouse River, start with the Towner site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.