Skip to content

Grail Fire and EMS Frequencies

We do not have frequencies listed specifically for Grail in McKenzie County, North Dakota yet. Countywide channels for McKenzie County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Keene (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 14 miles away.

About Grail Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grail: McKenzie County Fire 154.2200 MHz, P25, NAC 301. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example McKenzie County Fire talkgroup 27203 (hex 6a43).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grail, start with the Keene site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 14 miles away. Its control channels: 852.0625, 852.2875 MHz.

Data updated .

McKenzie County channels that also cover Grail

Fire Dispatch

Fire Dispatch frequencies for McKenzie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 301P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 300P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 299P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 302P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2500
In 159.3450
FMNWQWW479

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
McKenzie County FireCounty Fire/EMS Main272036a43T
McKenzie County FireCounty Fire/EMS Operations272046a44T
McKenzie County FireCounty Fire/EMS Operations272056a45T
McKenzie County FireCounty Fire/EMS Operations272066a46T
McKenzie County FireCounty Fire/EMS Operations272076a47T
McKenzie County FireCounty Fire/EMS Operations272086a48T
McKenzie County EMSCounty EMS Operations273016aa5T
McKenzie County EMSCounty EMS Operations273026aa6T

Nearest trunked radio sites

Distances are measured from the center of Grail.

Keene · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 48 (hex 30) · NAC A6F · about 14 mi away
Control 852.0625, 852.2875
Voice 851.7875
Killdeer · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 25 (hex 19) · NAC A68 · about 21 mi away
Control 853.4375, 853.8875
Voice 853.2125
Watford City · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 51 (hex 33) · NAC A62 · about 29 mi away
Control 852.1125, 852.3375
Voice 851.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grail?

We do not have a fire dispatch channel listed specifically for Grail. The county-level fire dispatch channels in the same county: McKenzie County Fire 154.2200 MHz, P25, NAC 301.

Do fire departments and EMS use a trunked radio system in Grail?

Yes. The county-level systems that cover Grail are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Grail?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Grail?

For Grail, start with the Keene site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.0625, 852.2875 MHz. Program a control channel first; the scanner finds the voice channels from it.