Skip to content

Bicker Fire and EMS Frequencies

We do not have frequencies listed specifically for Bicker in Mountrail County, North Dakota yet. Countywide channels for Mountrail County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Columbus (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 14 miles away.

About Bicker Fire and EMS Frequencies

Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Mountrail County Fire talkgroup 31203 (hex 79e3).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bicker, start with the Columbus site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 14 miles away. Its control channels: 852.0875, 852.3125 MHz.

Data updated .

Mountrail County channels that also cover Bicker

Hospitals & Medical

Hospitals & Medical frequencies for Mountrail County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mountrail County HospitalMountrial County Medical Center155.3850FMNWPMN242
Mountrail County HospitalMountrial County Medical Center163.2500FMNWPMN242

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Mountrail County FireCounty Fire/EMS Main3120379e3T
Mountrail County FireCounty Fire/EMS Operations3120479e4T
Mountrail County FireCounty Fire/EMS Operations3120579e5T
Mountrail County FireCounty Fire/EMS Operations3120679e6T
Mountrail County FireCounty Fire/EMS Operations3120779e7T
Mountrail County EMSCounty EMS Operations313017a45T
Mountrail County EMSCounty EMS Operations313027a46T

Nearest trunked radio sites

Distances are measured from the center of Bicker.

Columbus · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 11 (hex B) · NAC A60 · about 14 mi away
Control 852.0875, 852.3125
Voice 851.8125
Ray · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 39 (hex 27) · NAC A66 · about 15 mi away
Control 853.5625, 853.7875
Voice 853.3375
Alamo · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 47 (hex 2F) · NAC A6E · about 25 mi away
Control 852.0375, 852.2625
Voice 851.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Bicker?

Yes. The county-level systems that cover Bicker are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bicker?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bicker?

For Bicker, start with the Columbus site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.0875, 852.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.